Proel Sound LTX Series Loudspeakers

LTX 12P Passive Loudspeaker system LTX is a complete series of active and passive speakers designed specifically for a a wide range of commercial and residential installations. The speaker systems are hosted in rugged plywood enclosures available in black or white and offering a refined and unobtrusive aesthetics, capable of fitting into any environment. All the cabinets feature multiple suspension points and dedicated accessories for a wide choice of mounting options. The KPTLTP bracket (included with LTX6 and LTX8) allows to install the speakers on walls and ceiling with variable tilt and swivel speaker orientation, offering the possibility to obtain a more uniform coverage of the audience. The C-shape brackets (for LTX10 and LTX12 models) allow to mount the speaker on walls, ceiling and stage structures for unobtrusive installation. LTX8, LTX10 and LTX12 are fitted with a standard pole adapter that allows to use the speaker also as a portable audio system with a standard floor speaker stand. For the high frequency reproduction we have designed symmetrical 90x90° dispersion horns, able to provide constant coverage for large audiences in both vertical and horizontal installations, and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offer an extended response with deep and tight basses. The active versions are powered by amplifiers featuring the latest technologies for amplification, such as Switch Mode Power Supply and CLASS D output stages, and providing a massive amount of power with reduced size and weight. They include a sophisticated pre-amp section with up to 24 dB/oct. phase aligned crossover filters and active EQ filters for the system’s fine tuning, together with POWERCON mains connectors. The HF and LF independent LIMITER circuits ensure an undistorted sound even at the loudest level and a total loudspeaker protection. Passive versions feature carefully designed linear phase crossover filters, HF protection circuits and SPEAKON connectors LTX12P 1” compression driver 12” woofer 90° H x 90° V coverage 500W peak power handling Frequency response 50 Hz - 20 kHz SPL 1w/1m 96dB   Technical specs: System type 2-way vented enclosure High Frequency Device 1” compression driver with 1" VC Low Frequency Device 12” woofer with 2.5” voice coil Angular Coverage 90° H x 90° V Power Rating Continuous 250 W Power Rating Peak 500 W Impedance 8 ohm Frequency Response 50 Hz - 20 kHz SPL (1w / 1m) 96 dB Connectors 2 x SPEAKON Flying System 4 x M8, 3 x M6 Construction Plywood Cabinet Colour Black Handles 1 x rear Mounting Pole 1 x bottom Mounting Bracket Tilt and Swivel bracket (optional)C-shape bracket (optional) Dimensions (W x H x D) 345 x 595 x 300 mm Weight 14.8Kg / 32.6 lbs

Lis Plus Moins

LTX 8P Passive Loudspeaker system LTX is a complete series of active and passive speakers designed specifically for a a wide range of commercial and residential installations. The speaker systems are hosted in rugged plywood enclosures available in black or white and offering a refined and unobtrusive aesthetics, capable of fitting into any environment. All the cabinets feature multiple suspension points and dedicated accessories for a wide choice of mounting options. The KPTLTP bracket (included with LTX6 and LTX8) allows to install the speakers on walls and ceiling with variable tilt and swivel speaker orientation, offering the possibility to obtain a more uniform coverage of the audience. The C-shape brackets (for LTX10 and LTX12 models) allow to mount the speaker on walls, ceiling and stage structures for unobtrusive installation. LTX8, LTX10 and LTX12 are fitted with a standard pole adapter that allows to use the speaker also as a portable audio system with a standard floor speaker stand. For the high frequency reproduction we have designed symmetrical 90x90° dispersion horns, able to provide constant coverage for large audiences in both vertical and horizontal installations, and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offer an extended response with deep and tight basses. The active versions are powered by amplifiers featuring the latest technologies for amplification, such as Switch Mode Power Supply and CLASS D output stages, and providing a massive amount of power with reduced size and weight. They include a sophisticated pre-amp section with up to 24 dB/oct. phase aligned crossover filters and active EQ filters for the system’s fine tuning, together with POWERCON mains connectors. The HF and LF independent LIMITER circuits ensure an undistorted sound even at the loudest level and a total loudspeaker protection. Passive versions feature carefully designed linear phase crossover filters, HF protection circuits and SPEAKON connectors LTX8P 1” compression driver 8” woofer 90° H x 90° V coverage 160 W peak power handling Frequency response 70 Hz - 20 kHz SPL 1w/1m 92 dB   Technical specs: System type 2-way vented enclosure High Frequency Device 1” compression driver with 1" VC Low Frequency Device 8” woofer with 1.5” VC Angular Coverage 90° H x 90° V Power Rating Continuous 160 W Power Rating Peak 320 W Impedance 8 ohm Frequency Response 70 Hz - 20 kHz SPL (1w / 1m) 92 dB Connectors 2 x SPEAKON Flying System 3 x M8, 3 x M6 Construction Plywood Cabinet Colour Black Handles 1 x rear Mounting Pole 1 x bottom Mounting Bracket Tilt and Swivel bracket (included)C-shape bracket (optional) Dimensions (W x H x D) 227 x 442 x 220 mm Weight 6.95 kg / 15.3 lbs

Lis Plus Moins

LTX 8A Active Loudspeaker system LTX is a complete series of active and passive speakers designed specifically for a a wide range of commercial and residential installations. The speaker systems are hosted in rugged plywood enclosures available in black or white and offering a refined and unobtrusive aesthetics, capable of fitting into any environment. All the cabinets feature multiple suspension points and dedicated accessories for a wide choice of mounting options. The KPTLTP bracket (included with LTX6 and LTX8) allows to install the speakers on walls and ceiling with variable tilt and swivel speaker orientation, offering the possibility to obtain a more uniform coverage of the audience. The C-shape brackets (for LTX10 and LTX12 models) allow to mount the speaker on walls, ceiling and stage structures for unobtrusive installation. LTX8, LTX10 and LTX12 are fitted with a standard pole adapter that allows to use the speaker also as a portable audio system with a standard floor speaker stand. For the high frequency reproduction we have designed symmetrical 90x90° dispersion horns, able to provide constant coverage for large audiences in both vertical and horizontal installations, and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offer an extended response with deep and tight basses. The active versions are powered by amplifiers featuring the latest technologies for amplification, such as Switch Mode Power Supply and CLASS D output stages, and providing a massive amount of power with reduced size and weight. They include a sophisticated pre-amp section with up to 24 dB/oct. phase aligned crossover filters and active EQ filters for the system’s fine tuning, together with POWERCON mains connectors. The HF and LF independent LIMITER circuits ensure an undistorted sound even at the loudest level and a total loudspeaker protection. Passive versions feature carefully designed linear phase crossover filters, HF protection circuits and SPEAKON connectors LTX8A 1” compression driver 8” woofer 90° H x 90° V coverage 320W peak power amplifier Frequency response 70 Hz - 20 kHz SPL max peak 121 dB   Technical specs: System type 2-way vented enclosure High Frequency Device 1” compression driver with 1" VC Low Frequency Device 8” woofer with 1.5” VC Angular Coverage 90° H x 90° V Total peak power 320 W HF Amplifier Continuous Power 80 W Class D LF Amplifier Continuous Power 80 W Class D Power Supply SMPS Processing Analog Frequency Response 70 Hz - 20 kHz Max SPL 121 dB Connectors IN: COMBO, LINK: XLR M Controls LEVEL Flying System 3 x M8, 2 x M6 Construction Plywood Cabinet Colour Black / White Handles 1 x rear Mounting Pole 1 x bottom Mounting Bracket Tilt and Swivel bracket (included)C-shape bracket (optional) Power Supply 100 - 240 VAC 50/60 Hz Dimensions (W x H x D) 227 x 442 x 220 mm Weight 7.0 kg / 15.4 lbs

Lis Plus Moins

LTX 6P Passive Loudspeaker system LTX is a complete series of active and passive speakers designed specifically for a a wide range of commercial and residential installations. The speaker systems are hosted in rugged plywood enclosures available in black or white and offering a refined and unobtrusive aesthetics, capable of fitting into any environment. All the cabinets feature multiple suspension points and dedicated accessories for a wide choice of mounting options. The KPTLTP bracket (included with LTX6 and LTX8) allows to install the speakers on walls and ceiling with variable tilt and swivel speaker orientation, offering the possibility to obtain a more uniform coverage of the audience. The C-shape brackets (for LTX10 and LTX12 models) allow to mount the speaker on walls, ceiling and stage structures for unobtrusive installation. LTX8, LTX10 and LTX12 are fitted with a standard pole adapter that allows to use the speaker also as a portable audio system with a standard floor speaker stand. For the high frequency reproduction we have designed symmetrical 90x90° dispersion horns, able to provide constant coverage for large audiences in both vertical and horizontal installations, and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offer an extended response with deep and tight basses. The active versions are powered by amplifiers featuring the latest technologies for amplification, such as Switch Mode Power Supply and CLASS D output stages, and providing a massive amount of power with reduced size and weight. They include a sophisticated pre-amp section with up to 24 dB/oct. phase aligned crossover filters and active EQ filters for the system’s fine tuning, together with POWERCON mains connectors. The HF and LF independent LIMITER circuits ensure an undistorted sound even at the loudest level and a total loudspeaker protection. Passive versions feature carefully designed linear phase crossover filters, HF protection circuits and SPEAKON connectors LTX6P 1” neodymium tweeter 6.5” woofer 90° H x 90° V coverage 160 W peak power handling Frequency response 75 Hz - 20 kHz SPL 1w/1m 88 dB   Technical specs: System type 2-way vented enclosure High Frequency Device 1" neodymium tweter Low Frequency Device 6.5” woofer with 1” VC Angular Coverage 90° H x 90° V Power Rating Continuous 80 W Power Rating Peak 160 W Impedance 8 ohm Frequency Response 75 Hz - 20 kHz SPL (1w / 1m) 88 dB Connectors 2 x SPEAKON Flying System 4 x M8, 3 x M6 Construction Plywood Cabinet Colour Black Mounting Bracket Tilt and Swivel bracket (included)C-shape bracket (optional) Dimensions (W x H x D) 205 x 318 x 200 mm Weight 4.45 kg / 9.8 lbs

Lis Plus Moins

LTX 6A Active Loudspeaker system LTX is a complete series of active and passive speakers designed specifically for a a wide range of commercial and residential installations. The speaker systems are hosted in rugged plywood enclosures available in black or white and offering a refined and unobtrusive aesthetics, capable of fitting into any environment. All the cabinets feature multiple suspension points and dedicated accessories for a wide choice of mounting options. The KPTLTP bracket (included with LTX6 and LTX8) allows to install the speakers on walls and ceiling with variable tilt and swivel speaker orientation, offering the possibility to obtain a more uniform coverage of the audience. The C-shape brackets (for LTX10 and LTX12 models) allow to mount the speaker on walls, ceiling and stage structures for unobtrusive installation. LTX8, LTX10 and LTX12 are fitted with a standard pole adapter that allows to use the speaker also as a portable audio system with a standard floor speaker stand. For the high frequency reproduction we have designed symmetrical 90x90° dispersion horns, able to provide constant coverage for large audiences in both vertical and horizontal installations, and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offer an extended response with deep and tight basses. The active versions are powered by amplifiers featuring the latest technologies for amplification, such as Switch Mode Power Supply and CLASS D output stages, and providing a massive amount of power with reduced size and weight. They include a sophisticated pre-amp section with up to 24 dB/oct. phase aligned crossover filters and active EQ filters for the system’s fine tuning, together with POWERCON mains connectors. The HF and LF independent LIMITER circuits ensure an undistorted sound even at the loudest level and a total loudspeaker protection. Passive versions feature carefully designed linear phase crossover filters, HF protection circuits and SPEAKON connectors LTX6A 1” neodymium tweeter 6.5” woofer 90° H x 90° V coverage 320 W peak power amplifier Frequency response 75 Hz - 20 kHz SPL max peak 110 dB   Technical specs: System type 2-way vented enclosure High Frequency Device 1" neodymium tweeter Low Frequency Device 6.5” woofer with 1” VC Angular Coverage 90° H x 90° V Total peak power 320 W HF Amplifier Continuous Power 80 W Class D LF Amplifier Continuous Power 80 W Class D Power Supply SMPS Processing Analog Frequency Response 75 Hz - 20 kHz Max SPL 110 dB Connectors IN: COMBO, LINK: XLR M Controls LEVEL Flying System 4 x M8, 2 x M6 Construction Plywood Cabinet Colour Black Mounting Bracket Tilt and Swivel bracket (included)C-shape bracket (optional) Power Supply 100 - 240 VAC 50/60 Hz Dimensions (W x H x D) 205 x 318 x 200 mm Weight 4.5 kg / 9.9 lbs

Lis Plus Moins

LTX 12A Active Loudspeaker system LTX is a complete series of active and passive speakers designed specifically for a a wide range of commercial and residential installations. The speaker systems are hosted in rugged plywood enclosures available in black or white and offering a refined and unobtrusive aesthetics, capable of fitting into any environment. All the cabinets feature multiple suspension points and dedicated accessories for a wide choice of mounting options. The KPTLTP bracket (included with LTX6 and LTX8) allows to install the speakers on walls and ceiling with variable tilt and swivel speaker orientation, offering the possibility to obtain a more uniform coverage of the audience. The C-shape brackets (for LTX10 and LTX12 models) allow to mount the speaker on walls, ceiling and stage structures for unobtrusive installation. LTX8, LTX10 and LTX12 are fitted with a standard pole adapter that allows to use the speaker also as a portable audio system with a standard floor speaker stand. For the high frequency reproduction we have designed symmetrical 90x90° dispersion horns, able to provide constant coverage for large audiences in both vertical and horizontal installations, and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offer an extended response with deep and tight basses. The active versions are powered by amplifiers featuring the latest technologies for amplification, such as Switch Mode Power Supply and CLASS D output stages, and providing a massive amount of power with reduced size and weight. They include a sophisticated pre-amp section with up to 24 dB/oct. phase aligned crossover filters and active EQ filters for the system’s fine tuning, together with POWERCON mains connectors. The HF and LF independent LIMITER circuits ensure an undistorted sound even at the loudest level and a total loudspeaker protection. Passive versions feature carefully designed linear phase crossover filters, HF protection circuits and SPEAKON connectors LTX12A 1” compression driver 12” woofer 90° H x 90° V coverage 600 W peak power amplifier Frequency response 50 Hz - 20 kHz SPL max peak 124 dB   Technical specs: System type 2-way vented enclosure High Frequency Device 1” compression driver with 1" VC Low Frequency Device 12” woofer with 2.5” voice coil Angular Coverage 90° H x 90° V Total peak power 600 W HF Amplifier Continuous Power 50 W Class AB LF Amplifier Continuous Power 250 W Class D Power Supply SMPS Processing Analog Frequency Response 50 Hz - 20 kHz Max SPL 124 dB Connectors IN: COMBO, LINK: XLR M Controls LEVEL Flying System 4 x M8, 2 x M6 Construction Plywood Cabinet Colour Black / White Handles 1 x rear Mounting Pole 1 x bottom Mounting Bracket Tilt and Swivel bracket (optional)C-shape bracket (optional) Power Supply 230 or 115 VAC 50/60 Hzwith LINE VOLTAGE selector Dimensions (W x H x D) 345 x 595 x 300 mm Weight 15.0 kg / 33.1 lbs

Lis Plus Moins

LTX 10P Passive Loudspeaker system LTX is a complete series of active and passive speakers designed specifically for a a wide range of commercial and residential installations. The speaker systems are hosted in rugged plywood enclosures available in black or white and offering a refined and unobtrusive aesthetics, capable of fitting into any environment. All the cabinets feature multiple suspension points and dedicated accessories for a wide choice of mounting options. The KPTLTP bracket (included with LTX6 and LTX8) allows to install the speakers on walls and ceiling with variable tilt and swivel speaker orientation, offering the possibility to obtain a more uniform coverage of the audience. The C-shape brackets (for LTX10 and LTX12 models) allow to mount the speaker on walls, ceiling and stage structures for unobtrusive installation. LTX8, LTX10 and LTX12 are fitted with a standard pole adapter that allows to use the speaker also as a portable audio system with a standard floor speaker stand. For the high frequency reproduction we have designed symmetrical 90x90° dispersion horns, able to provide constant coverage for large audiences in both vertical and horizontal installations, and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offer an extended response with deep and tight basses. The active versions are powered by amplifiers featuring the latest technologies for amplification, such as Switch Mode Power Supply and CLASS D output stages, and providing a massive amount of power with reduced size and weight. They include a sophisticated pre-amp section with up to 24 dB/oct. phase aligned crossover filters and active EQ filters for the system’s fine tuning, together with POWERCON mains connectors. The HF and LF independent LIMITER circuits ensure an undistorted sound even at the loudest level and a total loudspeaker protection. Passive versions feature carefully designed linear phase crossover filters, HF protection circuits and SPEAKON connectors LTX10P 1” compression driver 10” woofer 90° H x 90° V coverage 500W peak power handling Frequency response 60 Hz - 20 kHz SPL 1w/1m 94 dB Technical specs: System type 2-way vented enclosure High Frequency Device 1” compression driver with 1" VC Low Frequency Device 10” woofer with 2” voice coil Angular Coverage 90° H x 90° V Power Rating Continuous 250 W Power Rating Peak 500 W Impedance 8 ohm Frequency Response 60 Hz - 20 kHz SPL (1w / 1m) 94 Connectors 2 x SPEAKON Flying System 4 x M8, 3 x M6 Construction Plywood Cabinet Colour Black / White Handles 1 x rear Mounting Pole 1 x bottom Mounting Bracket Tilt and Swivel bracket (optional)C-shape bracket (optional) Dimensions (W x H x D) 295 x 515 x 280 mm Weight 11.7 kg / 25.8 lbs

Lis Plus Moins

LTX 10A Active Loudspeaker system LTX is a complete series of active and passive speakers designed specifically for a a wide range of commercial and residential installations. The speaker systems are hosted in rugged plywood enclosures available in black or white and offering a refined and unobtrusive aesthetics, capable of fitting into any environment. All the cabinets feature multiple suspension points and dedicated accessories for a wide choice of mounting options. The KPTLTP bracket (included with LTX6 and LTX8) allows to install the speakers on walls and ceiling with variable tilt and swivel speaker orientation, offering the possibility to obtain a more uniform coverage of the audience. The C-shape brackets (for LTX10 and LTX12 models) allow to mount the speaker on walls, ceiling and stage structures for unobtrusive installation. LTX8, LTX10 and LTX12 are fitted with a standard pole adapter that allows to use the speaker also as a portable audio system with a standard floor speaker stand. For the high frequency reproduction we have designed symmetrical 90x90° dispersion horns, able to provide constant coverage for large audiences in both vertical and horizontal installations, and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offer an extended response with deep and tight basses. The active versions are powered by amplifiers featuring the latest technologies for amplification, such as Switch Mode Power Supply and CLASS D output stages, and providing a massive amount of power with reduced size and weight. They include a sophisticated pre-amp section with up to 24 dB/oct. phase aligned crossover filters and active EQ filters for the system’s fine tuning, together with POWERCON mains connectors. The HF and LF independent LIMITER circuits ensure an undistorted sound even at the loudest level and a total loudspeaker protection. Passive versions feature carefully designed linear phase crossover filters, HF protection circuits and SPEAKON connectors LTX10A 1” compression driver 10” woofer 90° H x 90° V coverage 600 W peak power amplifier Frequency response 60 Hz - 20 kHz SPL max peak 123 dB Technical specs: System type 2-way vented enclosure High Frequency Device 1” compression driver with 1" VC Low Frequency Device 10” woofer with 2” voice coil Angular Coverage 90° H x 90° V Total peak power 600 W HF Amplifier Continuous Power 50 W Class AB LF Amplifier Continuous Power 250 W Class D Power Supply SMPS Processing Analog Frequency Response 60 Hz - 20 kHz Max SPL 123 dB Connectors IN: COMBO, LINK: XLR M Controls LEVEL Flying System 4 x M8, 2 x M6 Construction Plywood Cabinet Colour Black / White Handles 1 x rear Mounting Pole 1 x bottom Mounting Bracket Tilt and Swivel bracket (optional)C-shape bracket (optional) Power Supply 230 or 115 VAC 50/60 Hzwith LINE VOLTAGE selector Dimensions (W x H x D) 295 x 515 x 280 mm Weight 12.0 kg / 26.5 lbs

Lis Plus Moins