Good to have you here!
Our website uses cookies. By clicking on Accept you are agreeing to our terms of service and privacy policy.
Welcome to TH MUSIC
Nicht vorrätig
Passive Direct Injection Box DIRECT100P The 100 Series is a range of D.I. Boxes and Headphone Amps designed to complement audio systems in stage applications, recording studios and fixed installations. Hosted in a stylish extruded and stackable aluminum shell or in a sturdy metal chassis, the 100 Series products are meant to deliver sound quality, versatility and stage-proof reliability in a very affordable package. High quality isolation transformer for ultra-flat frequency response High quality electronic components ¼” JACK input and link connectors XLR-M balanced output 20dB & 40dB PAD and GND lift switch Stackable aluminum shell Technical specs: Input Section Input Impedance >250 Kohm Max Input Level +10 (PAD at 0) / +30 (PAD at 20) / +50 (PAD at 40) dBu Connectors 1 x 1/4" jack unbalanced Link 1 x 1/4" jack unbalanced Output Section Output Transformer Balanced (isolated with shielding) Insertion Loss 26 dB Load Impedance 600 Ohms or greater Connector XLR male System Performance Distortion THD 50÷20k Hz 0dBu < 0.007 % Frequency Response 40 Hz to 20 kHz (-3 dB) General Controls PAD 0 / -20 / -40, GND LIFT Dimensions (W x H x D) 134 x 50 x 105 mm Weight (excluding batteries) 0,55 Kg
Nicht vorrätig
Active Direct Injection Box DIRECT100A The 100 Series is a range of D.I. Boxes and Headphone Amps designed to complement audio systems in stage applications, recording studios and fixed installations. Hosted in a stylish extruded and stackable aluminum shell or in a sturdy metal chassis, the 100 Series products are meant to deliver sound quality, versatility and stage-proof reliability in a very affordable package. Active Direct Injection Box High quality isolation transformer for ultra-flat frequency response Low-noise OP amps with high-quality sound performance XLR-F and ¼” JACK input connectors + ¼” JACK link - XLR-M balanced output 20dB PAD and GND lift switch Stackable aluminum shell Technical specs: Input Section Input Impedance >250 Kohm Max Input Level +6 (PAD at 0) / +26 (PAD at 20) dBu Connectors 1 x XLR-F + 1 x 1/4" jack unbalanced Link 1 x 1/4" jack unbalanced Output Section Output Transformer Balanced (fully isolated) Insertion Loss 0 dB Load Impedance 600 Ohms or greater Connector XLR male System Performance Distortion THD 50÷20k Hz 0dBu < 0.005 % Noise < -105 dBu unweighted Frequency Response 10 Hz to 40 kHz (-3 dB) General Controls ON/OFF, PAD -20, GND LIFT Indicators Power ON Phantom Power +18 volts DC to +48 volts DC Battery 9 volt PP3 type alkaline Dimensions (W x H x D) 152 x 50 x 134 mm Weight (excluding batteries) 0,70 Kg
Nicht vorrätig
Passive Direct Injection Box D10P DI Boxes perform several important functions: they are designed for impedance matching and balancing the signal of a guitar, a keyboard or any line-level output source, and for injecting directly the signal with very long connections to the XLR microphone inputs of a mixing console. D10P is a passive direct box with transformer and does not require any external power such as phantom power or batteries to work. The advantage of a transformer is the possibility to avoid any electrical connection between the sound source and the mixer. This provides two huge benefits: with no electrical path, ground loops are eliminated and the cancellation of common-mode noise, like hum, is possible.
Nicht vorrätig
Active Direct Injection Box D10A DI Boxes perform several important functions: they are designed for impedance matching and balancing the signal of a guitar, a keyboard or any line-level output source, and for injecting directly the signal with very long connections to the XLR microphone inputs of a mixing console. D10A is an active direct box with transformer and requires the phantom power to work. The advantage of a transformer is the possibility to avoid any electrical connection between the sound source and the mixer. This provides two huge benefits: with no electrical path, ground loops are eliminated and the cancellation of common-mode noise, like hum, is possible. The advantage of active instead of passive DIBOX is null insertion loss and less output hum and noise. Technical Specs: Input Section Connectors 1 x COMBO XLR-F + 1/4" JACK unbalanced Link 1 x 1/4" JACK unbalanced Input Impedance 1 Mohm (no PAD) / 47 Kohm (with PAD) Max Input Level + 16 dBu (no PAD) / + 42 dBu (with PAD) Output Section Connector XLR-M balanced Min Load Impedance 600 Ohms or greater Output Transformer Balanced (fully isolated) Max Output Level +16 dBu System Performance Distortion THD+N 0dBu < 0.01 % Noise < -112 dBu unweighted Frequency Response 10 Hz to 100 kHz (-6 dB) Insertion Loss 0 dB General Controls PAD -26 dB, GND LIFT Indicators Power ON Power Supply Phantom Power +48 volts Dimensions (W x H x D) 160 x 52 x 106 mm (6.30 x 2.05 x 4.17 ") Weight 0,52 Kg
Our website uses cookies. By clicking on Accept you are agreeing to our terms of service and privacy policy.