HARDWARE

  From a warm whisper to a deep roar - Elevate your snare drum to its full potential The snare drum is the most important component in the drum set, and the snare-wire is a crucial component of your drum’s sound. This fact has not been widely recognized until very recently; only a few drummers understand this important connection. In 1960, Ludwig and Slingerland manufactured what has now become the standard for good vintage wires. Several manufacturers have tried to re-produce the sound. After years of research, we have replicated the Slingerland wire taking several factors into account such as material, spiral diameter and pitch. We finally decided on a core thickness of 0.5 mm, a spiral diameter of 1.35mm and a pitch of 3.4 mm. In that process, we also found that the end plate is another determinant of a snare-wire’s sensitivity, and we have tried various sizes for these as well. We concluded that 0.5mm is optimal to hold the wires. We also decided to exclude the guiding grooves for snare strings and tapes that most manufacturers use. These guiding grooves impaired the sensitivity of the snare drum. Our end plate is quite thin however; it may have caused breakage of strings and tapes. We resolved the problem by having the lapel at the holes on the end plate.   After years of careful analysis of the material composition, thickness of the end plate, shaping experiments and production consideration, we have the CANOPUS Vintage Snare Wire.Super Jazz drummer Bill Stewart once visited us. He was so impressed by our proto-type Vintage Snare Wires he asked us if he could use it. Many CANOPUS endorsers appreciate the sound quality of this snare wire.   42 Strand Rich Impact *discontinuous* These new Canopus 42 strand snare wires give a unique rich and full sound, and provide great impact.Having 42 strands may initially give an impression of being “too much”,  but the VSW-42 wires feature ultra thin end plates – allowing players to enjoy maximum tone and response at all volume levels, whilst also providing great sensitivity and control over the sound. Players can enjoy a comfortably muted, tight sound and very quick response.   * 0.5mm thick Brass End Plate* Vintage Wire 42 Strand* Dry (DR) Only

Lees meer minder

Snare wires which enhance even the subtitles of nuances in the midst of very loud backbeats! By adopting spiral wires with an abundance of coils coupled with 1mm end-plates, we have achieved a good balance between volume that is aggressive enough for a powerful backbeat and swift response for delicate phrasing. With this one snare wire, you can hav a an aggressive, loud snare sound and maintain sensitivity. CPSS-BB14DR（Dry=Without plating） These snare wires create a loud attack and sharp response even for ghost notes. Very effective for wood-shell snare drums. CPSS-BB14NP（Nickel plated） These snare wires have both a loud attack and bright sound. They have an enormous effect on metal-shell snare drums. They will improve the potential of a loud snare tremendously. CPSS-BB14SNPW (Nickel Plated) Canopus Back Beat snare wires have been developed to emphasize the back-beat – especially in high volume situations where the snare sound may feel like it is being buried by other instruments.Maintaining these qualities of the standard Canopus Back Beat wires, we have developed the extra wide 42 strand snare wire – which allows the drummer to play comfortably, without straining, while delivering a full, pleasing snare back-beat at all volume levels. We have eliminated 2 common problems of other wide snares: 1) Canopus 42 strand snare wires do not mute the resonance and response of the drum. 2) We have controlled the indistinct sound created by excess snare buzz. Furthermore, the 42 strand snare uses high quality nickel plated wires which highlight every nuance of sound and vibration and yet have a controlled response and sustain. Enjoy the open, powerful and responsive sound.

Lees meer minder

From a warm whisper to a deep roar - Elevate your snare drum to its full potential The snare drum is the most important component in the drum set, and the snare-wire is a crucial component of your drum’s sound. This fact has not been widely recognized until very recently; only a few drummers understand this important connection. In 1960, Ludwig and Slingerland manufactured what has now become the standard for good vintage wires. Several manufacturers have tried to re-produce the sound. After years of research, we have replicated the Slingerland wire taking several factors into account such as material, spiral diameter and pitch. We finally decided on a core thickness of 0.5 mm, a spiral diameter of 1.35mm and a pitch of 3.4 mm. In that process, we also found that the end plate is another determinant of a snare-wire’s sensitivity, and we have tried various sizes for these as well. We concluded that 0.5mm is optimal to hold the wires. We also decided to exclude the guiding grooves for snare strings and tapes that most manufacturers use. These guiding grooves impaired the sensitivity of the snare drum. Our end plate is quite thin however; it may have caused breakage of strings and tapes. We resolved the problem by having the lapel at the holes on the end plate.   After years of careful analysis of the material composition, thickness of the end plate, shaping experiments and production consideration, we have the CANOPUS Vintage Snare Wire.Super Jazz drummer Bill Stewart once visited us. He was so impressed by our proto-type Vintage Snare Wires he asked us if he could use it. Many CANOPUS endorsers appreciate the sound quality of this snare wire.

Lees meer minder

It enables you to angle it at 3 different positions.

Lees meer minder

Nylon Snare Wire Belt (CNB) We have selected flexible nylon fiber for its excellent durability in a woven belt. With this innovative snare belt, we got a natural response of a snare wire similar to the snare wire cord, and what is more, the choked sound caused by conventional film belt is not noticed at all. Snare Wire Cord (CNC) This is an ideal cord for a sustaining, “natural bound” and “stabilizing” snare wire. The only drawback used to be a sudden break of the string while in use.Canopus has conducted research into core fiber material, thread volume and weaving technique to come up with a very durable snare cord with natural bound (compared with our products in the past).The fitting of these snare wires have vastly improved whether loosely or tightly adjusted. This is a most suitable item for situations where delicacy is required (in a recording for instance).

Lees meer minder

  By combining Bolt-Tight and Red-Lock, you have our “Iron-Wall Guard” to ensure that even tuning and consistent sound are retained through even the most punishing performances.

Lees meer minder

Super Sensitive snare wires  Canopus Vintage snare wires are now available for Ludwig Super Sensitive drums made after 1968!The dry, warm tone of these wires brings out the original soothing and pleasant sound of these vintage drums.These wires not only give a deep, unified sound – they also provide remarkable sensitivity – making them a “must have” item for lovers of vintage snare drums.(These can also be used for YAMAHA 70’s parallel action drums SD-055M and 065M) Radio King “Clamshell” snare wires  Great news for Slingerland Radio King users!Snare wires for exclusive use on Radio King 14” snare drums with “Clamshell” strainer are now available from Canopus.The sound of these wires blends beautifully with the sound of 1ply maple and faithfully reproduces the classic “fat” and “dry” sound.For anyone who is looking for a tone that is as close as possible to the original snare sound, these snare wires are essential!

Lees meer minder

TB DT200DRUM THRONE The 200 series height adjustable drum throne with sturdy threaded shaft equipped with locking ring. Double braced legs. Seat size: 280mm Tube section: 28,6mm Height range: 480 mm – 590 mm  

Lees meer minder

Blazing Speed, incredible durability! The Speed Star Bearing that swept the world in the early 1990s has returned! Light, smooth pedal movement with incredible durability can be yours by simply replacing the existing parts on certain pedals with our new Speed Star Bearings. ※All stainless steel (SUS304) construction for durability and dependable performance. ※Unmatched speed and sensitivity from our crank-spring screw and rocker-hub design.(SS-5000) Materials:Rocker Hub: Stainless SUS304Bearing: Stainless SUS304Bearing Case: Stainless SUS304Crank-Spring Screw: Stainless SUS304

Lees meer minder

Maximum compactness and portability The flat-base snare stand was developed with compactness and portability as priorities.The basket angle adjustment is now gearless, making it even easier to use.Together with the Flat Base Cymbal Stand, it will help you carry them around with ease.The flat base is also convenient for setting up when used as a tom stand.   When Folded : 13” (330mm)Weight : 2.2kg (4.85lb)H≒17”〜24” (430mm 〜610mm)

Lees meer minder

Canopus Bassdrum Riser For adjustment of beating point on the Bass Drum of smaller diameter.

Lees meer minder

Holder & Clamp No. Type L-Rod Post CSTH-2 Single Tom Holder diameter 13mm diameter 25.4mm x 430mm CWTH-2 Double Tom Holder diameter 13mm diameter 25.4mm x 360mm CCH-1 Cymbal Holder ─── diameter 19mm x 310mm CSTP-1 Single Tom Clamp diameter 13mm ───   EL-WTC     Double Tom Clamp for YAIBA II Drum Kit 

Lees meer minder