Proel Sound Systems

LT812 A Professional 2+1 Audio System The LITE Series by PROEL is an extended range of active and passive speaker systems with plywood cabinet offering the renowned PROEL sound and a high-level performance in a reliable and affordable package.For the construction of the cabinets we have used plywood, a very lightweight and durable material that makes moving and installing these speakers very quick and easy. Strong, anti-scratch paint and steel grilles with an internal foam layer provide proper protection for years of service. The dual-angle pole holder featured in 8”, 10”, 12” and 15” models offers the possibility to obtain a more uniform coverage of the audience.For the high frequency reproduction of LITE Series we have designed wide-dispersion horns, able to provide constant coverage for large audiences and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offers an extended response with deep and tight basses.The LITE Series includes 6 active models ranging from 6.5” to dual 15” woofers, plus 1 satellites + subwoofer system. The extremely lightweight power modules used in the active models feature the latest technologies for amplification, such as Switch Mode Power Supply and CLASS D output stages, which provides a massive amount of power with a reduced weight. The power modules are hosted in fully-sealed die-cast aluminum boxes that provides protection, perfect insulation of the cabinet from the outside and extremely efficient cooling. Each module includes a sophisticated pre-amp section with up to 24 dB/ oct. phase aligned crossover filters and active EQ fi lters for the system’s fine tuning. The DUAL LIMITER circuit ensures an undistorted sound even at the loudest level and a total loudspeaker protection. The LT loudspeaker systems can be combined with the SW subwoofers, available in 5 models and capable of providing the perfect low frequency extension for each model of the series. SAT: 1” compression driver + 8” woofer with 1.5” VC SUB: 12” woofer with 3” VC 1600W peak power SAT: 2x200W RMS CLASS AB SUB: 400W RMS CLASS D Switch Mode Power Supply (SMPS) SUB LEVEL control SPL MAX 121dB + 124dB Frequency response 45 Hz - 20 kHz Plywood cabinets with anti-scratch paint SAT cabinet with dual-angle speaker stand adapter SUB cabinet with 4 wheels and space for transporting the satellites on top 1 rear handle (SAT), 2 aluminum side handles (SUB) Two SPEAKON power cables included   Technical specs: LT812SATSystem type: 2-way vented enclosureHigh Frequency Device: 1” compression driver with 1" VCLow Frequency Device: 8” woofer with 1.5” VCAngular Coverage: 60° H x 40° VTotal peak power: 1600 WAmplifier Continuous Power: 2 x 200 W Class ABPower Supply: SMPSProcessing: AnalogFrequency Response: 45 Hz - 20 kHzMax SPL: 121Connectors: 1 x SPEAKONConstruction: PlywoodCabinet Colour: BlackHandles: 1 x rearMounting Pole: 1 x bottom, dual angleDimensions (W x H x D): 220 x 442 x 260 mmWeight: 7.5 kg / 16.5 lbs. LT812SUBSystem type: Vented sub-wooferLow Frequency Device: 12” woofer with 3” voice coilTotal peak power: 1600 WAmplifier Continuous Power: 400 W Class DPower Supply: SMPSProcessing: AnalogFrequency Response: 45 Hz - 20 kHzMax SPL: 124Connectors: IN: 2 x COMBO, LINK: 2 x XLR M; OUT: 2 x SPEAKONControls: SUB LEVEL, GND LIFTConstruction: PlywoodCabinet Colour: BlackHandles: 2 x sidesMounting Pole: 1 x topPower Supply: 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selectorDimensions (W x H x D): 475 x 462 x 610 mmWeight: 34 kg / 74.9 lbs.

Lees meer minder

Bags for Session Series Padded cover for DIVA12  Padded cover for DIVA15  

Lees meer minder

Active Subwoofer DIVASUB18A DIVASUB18A is a digitally processed active subwoofer designed as an ideal complement to the DIVA Series speakers, capable not only of increasing the extension of the low frequency response, but also of significantly increasing the efficiency and performance of the whole system. The subwoofer uses a custom 18" high efficiency woofer with 3" voice coil, driven by a powerful 1500 W CLASS-D amplifier with high headroom and dynamic control via DSP, for maximum output power without distortion and constant reliability. The sophisticated preamp section includes advanced processing with a high-performance DSP processor, for linear response and high-definition sound. A user interface with LCD display and single-knob control is available, for quick selection and viewing of processor parameters. These parameters include the selection of crossover frequency, phase and delay, for perfect coupling with the satellite used. The cardioid configuration is also available, which allows the coupling of two DIVASUB18A to double the frontal efficiency of the system and, at the same time, drastically reduce the rear radiation. DIVASUB18A is housed in a lightweight and ultra-resistant plywood cabinet, with steel protection grille, two ergonomic handles, flange for support pole with M20 connection and 4 professional wheels equipped with braking system supplied as standard, for maximum ease of transport. Compact active subwoofer High efficiency custom 18" woofer with 3" VC 1500W peak power STEREO input and output High-definition DSP with 24-bit converters 2 presets (FLAT/BOOST) and 2 modes of use (NORMAL/CARDIOD) DELAY selection up to 10mt LCD display for DSP editing MAXIMUM SPL 132dB Frequency response 35 Hz – 160 Hz Technical specs: System type Vented enclosure subwoofer Loudspeaker 18''  woofer with 3" VC Amplifier Continuous Power 750 W Amplifier Peak Power 1500 W Frequency Response 35 Hz - 160 Hz Max SPL 132 dB Connectors IN: 2 x NEUTRIK COMBOOUT: 2 x NEUTRIK XLR-M Controls LCDDIAL Power Supply 230 VAC or 115 VAC 50/60 Hz Weight 38 kg (83.77 lb) Cabinet 15/18 mm plywoodBlack anti-scratch paint1.5 mm metal grille2 handles1 x pole socket4 x 75 mm wheels Dimensions (W x H x D) 510x650x650 (without wheels) mm510x650x752 (with wheels) mm

Lees meer minder

Active Speaker DIVA15A DIVA12A and DIVA15A are digitally processed active loudspeaker systems featuring multiple inputs and a versatile BLUETOOTH connectivity. Hosted in lightweight yet ultra-durable polypropylene cabinets with ergonomic handles, they combine selected transducers driven with a powerful 1000W CLASS-D amplifier with SMPS, featuring high headroom and an accurate dynamic control for the maximum undistorted output power. The sophisticated pre-amp section includes an advanced processing with high-performance DSP engine and linear phase FIR filters, for a very smooth response and high-definition sound. An intuitive user’s interface with LCD color display and single-knob control is available for a quick selection and display of the 5 available EQ presets (MUSIC, LIVE, DJ, MONITOR, SPEECH), allowing the speakers to be perfectly adapted to any kind of application. Thanks to the built-in 3-channel mixer with MIC/GUITAR/LINE input selection, HIGH and LOW EQ controls and two WIRELESS USB inputs for the use of PROEL U24 microphone systems, the DIVA12A and DIVA15A can be used in a variety of applications also without external equipment. The BLUETOOTH interface allows to reproduce audio in mono streaming with a single speaker or in stereo streaming with two speakers and the STEREO LINK (TWS) function. 2-way active processed loudspeaker system 1” high-definition compression driver with 1.35” VC and titanium diaphragm Wide-coverage 90° x 60° constant directivity horn 15” long-excursion woofer with 2,5” voice coil High-efficiency 1000 W peak Class D power amplifier with SMPS Built-in 3-channel mixer with MIC/LINE inputs and HIGH & LOW EQ controls High-definition DSP with 24-bit converters and FIR filters 5 DSP presets (MUSIC, LIVE, DJ, MONITOR, SPEECH) BLUETOOTH audio interface with STEREO LINK Color LCD display for the DSP editing SPL MAX: 129 dB Frequency response: 45 Hz - 20 kHz Lightweight, compact and ultra-durable PP cabinet 2 ergonomic handles for effortless transportation Slanted shape for the use as a stage monitor Four M10 flying points Technical specs: System type 2-way vented enclosure High Frequency Device 1’’ compression driver with 1.35" voice coil and titanium diaphragm Low Frequency Device 15" woofer with 2.5" VC Angular Coverage 90° H x 60° V Total Peak Power 1000 W HF Amplifier Continuous Power 100 W Class AB      LF Amplifier Continuous Power 400 W Class D Power Supply SMPS System Processing DSP Frequency Response45 45 Hz - 20 kHz Max SPL 129 dB Inputs 2 x MIC/LINE (COMBO), 1 X STEREO LINE (MINIJACK), 2 x USB WIRELESS Outputs 1 x selectable MIX OUT / CH1 LINK (M-XLR) Controls CHANNEL LEVEL, INPUT SELECTOR, HIGH & LOW EQ, ROTARY PUSH ENCODER, COLOR LCD Bluetooth Version 5.0, Audio Streaming, STEREO LINK (TWS) Power Supply 100-120 V~ or 220-240 V~ at 50/60 Hz with self-switch Rated Consumption* 300 W Floor Monitor Angle 45°  Flying System 4 x M10 - top/bottom Cabinet Material Polypropylene Handles 1 x top, 1 x side Mounting Pole 1 x bottom Dimensions (W x H x D) 421 x 696 x 382 mm Weight 19.0 kg (41.8 lb) * Rated consumption is measured with pink noise with a crest factor of 12 dB, this can be considered a standard music program.

Lees meer minder

Active Speaker DIVA12A DIVA12A and DIVA15A are digitally processed active loudspeaker systems featuring multiple inputs and a versatile BLUETOOTH connectivity. Hosted in lightweight yet ultra-durable polypropylene cabinets with ergonomic handles, they combine selected transducers driven with a powerful 1000W CLASS-D amplifier with SMPS, featuring high headroom and an accurate dynamic control for the maximum undistorted output power. The sophisticated pre-amp section includes an advanced processing with high-performance DSP engine and linear phase FIR filters, for a very smooth response and high-definition sound. An intuitive user’s interface with LCD color display and single-knob control is available for a quick selection and display of the 5 available EQ presets (MUSIC, LIVE, DJ, MONITOR, SPEECH), allowing the speakers to be perfectly adapted to any kind of application. Thanks to the built-in 3-channel mixer with MIC/GUITAR/LINE input selection, HIGH and LOW EQ controls and two WIRELESS USB inputs for the use of PROEL U24 microphone systems, the DIVA12A and DIVA15A can be used in a variety of applications also without external equipment. The BLUETOOTH interface allows to reproduce audio in mono streaming with a single speaker or in stereo streaming with two speakers and the STEREO LINK (TWS) function. 2-way active processed loudspeaker system 1” high-definition compression driver with 1.35” VC and titanium diaphragm Wide-coverage 90° x 60° constant directivity horn 12” long-excursion woofer with 2” voice coil High-efficiency 1000 W peak Class D power amplifier with SMPS Built-in 3-channel mixer with MIC/LINE inputs and HIGH & LOW EQ controls High-definition DSP with 24-bit converters and FIR filters 5 DSP presets (MUSIC, LIVE, DJ, MONITOR, SPEECH) BLUETOOTH audio interface with STEREO LINK Color LCD display for the DSP editing SPL MAX: 127 dB Frequency response: 50 Hz - 20 kHz Lightweight, compact and ultra-durable PP cabinet 2 ergonomic handles for effortless transportation Slanted shape for the use as a stage monitor Four M10 flying points Technical specs: System type 2-way vented enclosure High Frequency Device 1’’ compression driver with 1.35" voice coil and titanium diaphragm Low Frequency Device 12" woofer with 2" VC Angular Coverage 90° H x 60° V Total Peak Power 1000 W HF Amplifier Continuous Power 100 W Class AB      LF Amplifier Continuous Power 400 W Class D Power Supply SMPS System Processing DSP Frequency Response 50 Hz - 20 kHz Max SPL 127 dB Inputs 2 x MIC/LINE (COMBO), 1 X STEREO LINE (MINIJACK), 2 x USB WIRELESS Outputs 1 x selectable MIX OUT / CH1 LINK (M-XLR) Controls CHANNEL LEVEL, INPUT SELECTOR, HIGH & LOW EQ, ROTARY PUSH ENCODER, COLOR LCD Bluetooth Version 5.0, Audio Streaming, STEREO LINK (TWS) Power Supply 100-120 V~ or 220-240 V~ at 50/60 Hz with self-switch Rated Consumption* 300 W Floor Monitor Angle 45°  Flying System 4 x M10 - top/bottom Cabinet Material Polypropylene Handles 1 x top, 1 x side Mounting Pole 1 x bottom Dimensions (W x H x D) 364 x 617 x 346 mm Weight 16.0 kg (35.3 lb) * Rated consumption is measured with pink noise with a crest factor of 12 dB, this can be considered a standard music program.

Lees meer minder

DPX2500 PFC Stereo Power Amplifier DPX PFC is a series of ultra-lightweight power amplifiers able to provide, for professional mobile and fixed PA systems, a huge amount of power and the maximum performance and portability in a very affordable package. Thanks to the high-density Class D technology employed in the output stages, we’ve been able to build very powerful amplifiers in an ultra-compact and lightweight package. The extremely efficient Switch Mode Power Supply (SMPS) with Power Factor Correction technology (PFC) helps to reduce further the weight and provides universal mains operation, delivering constant energy to the loudspeakers regardless of the AC line voltage fluctuations and eliminating the need for market specific power supplies and related reliability issues. All models feature a built-in 24dB/octave stereo crossover with BI-AMP and HIGH-PASS options, for easily filtering a 2-way system without the need of additional outboard. Fast-attack precise CLIP LIMITERS guarantee maximum output without distortion, while a comprehensive protection system safeguards both the speakers and the amplifier. The electronics is hosted in a feather-light all-aluminum case, able to provide an efficient cooling and, at the same time, protection and durability over the years. DPX PFC are power amplifiers offering extraordinary value to professional entertainers, DJ and sound engineers looking for massive output, excellent performance and absolute portability. High-density Class D technology Very efficient Switch Mode Power Supply (SMPS) with PFC Built-in 24dB/octave stereo crossover Extensive protection system for maximum reliability Integrated fast-attack CLIP LIMITERS STEREO / BRIDGE / PARALLEL mode XLR input and link connectors SPEAKON output connectors AC, DC, thermal, short-circuit and VHF protection Precise 8-segment LED ladders FRONT-TO-BACK cooling system with variable speed fan Ultra-lightweight all-aluminum chassis  TOTAL WEIGHT less than 5kg Technical specs: Power 8 ohm * 700 W Power 4 ohm * 1250 W Power BRIDGE 8 ohm ** 2500 W Output Stage Class D Frequency response (+0.5/-0.5 dB) 20 Hz - 20 KHz Input Sensitivity +2.3 dBu / 1.0 Vrms GAIN (nominal/fixed) 39.7 dB Input Connectors / Impedance XLR-F (INPUT), XLR-M (LINK) / 20 Kohm (balanced), 10 Kohm (unbalanced) Output Connectors SPEAKON and Binding Post Damping Factor > 500 S/N Ratio (unweighted) > 100 dB THD+N < 0.15% Controls INPUT LEVEL, STEREO/BRIDGE-PARALLEL, FLAT/BI-AMP/HPF LED Indicators 7-LED BAR (ON, LIMIT, PROTECTION, -5dB / -10dB / -20dB / -40dB SIGNAL) Cooling Variable speed DC fan, air flow from front to rear Protections AC low power, DC, thermal, short circuit, VHF, CLIP limiter Mains Supply Voltage 100-240 VAC 50/60 Hz (±10%) Dimensions (W x H x D) 483 x 89 x 255 mm (19" x 3.5" x 10") Weight 4.2 Kg (9.26 lb) * Power per channel tested under EIA standard ** Power tested under the condition of 40ms burst, 1KHz sine wave and 1% THD.

Lees meer minder

DPX1700 PFC Stereo Power Amplifier DPX PFC is a series of ultra-lightweight power amplifiers able to provide, for professional mobile and fixed PA systems, a huge amount of power and the maximum performance and portability in a very affordable package. Thanks to the high-density Class D technology employed in the output stages, we’ve been able to build very powerful amplifiers in an ultra-compact and lightweight package. The extremely efficient Switch Mode Power Supply (SMPS) with Power Factor Correction technology (PFC) helps to reduce further the weight and provides universal mains operation, delivering constant energy to the loudspeakers regardless of the AC line voltage fluctuations and eliminating the need for market specific power supplies and related reliability issues. All models feature a built-in 24dB/octave stereo crossover with BI-AMP and HIGH-PASS options, for easily filtering a 2-way system without the need of additional outboard. Fast-attack precise CLIP LIMITERS guarantee maximum output without distortion, while a comprehensive protection system safeguards both the speakers and the amplifier. The electronics is hosted in a feather-light all-aluminum case, able to provide an efficient cooling and, at the same time, protection and durability over the years. DPX PFC are power amplifiers offering extraordinary value to professional entertainers, DJ and sound engineers looking for massive output, excellent performance and absolute portability. High-density Class D technology Very efficient Switch Mode Power Supply (SMPS) with PFC Built-in 24dB/octave stereo crossover Extensive protection system for maximum reliability Integrated fast-attack CLIP LIMITERS STEREO / BRIDGE / PARALLEL mode XLR input and link connectors SPEAKON output connectors AC, DC, thermal, short-circuit and VHF protection Precise 8-segment LED ladders FRONT-TO-BACK cooling system with variable speed fan Ultra-lightweight all-aluminum chassis  TOTAL WEIGHT less than 5kg Technical specs: Power 8 ohm * 500 W Power 4 ohm * 850 W Power BRIDGE 8 ohm ** 1700 W Output Stage Class D Frequency response (+0.5/-0.5 dB) 20 Hz - 20 KHz Input Sensitivity +2.3 dBu / 1.0 Vrms GAIN (nominal/fixed) 38.2 dB Input Connectors / Impedance XLR-F (INPUT), XLR-M (LINK) / 20 Kohm (balanced), 10 Kohm (unbalanced) Output Connectors SPEAKON and Binding Post Damping Factor > 500 S/N Ratio (unweighted) > 100 dB THD+N < 0.15% Controls INPUT LEVEL, STEREO/BRIDGE-PARALLEL, FLAT/BI-AMP/HPF LED Indicators 7-LED BAR (ON, LIMIT, PROTECTION, -5dB / -10dB / -20dB / -40dB SIGNAL) Cooling Variable speed DC fan, air flow from front to rear Protections AC low power, DC, thermal, short circuit, VHF, CLIP limiter Mains Supply Voltage 100-240 VAC 50/60 Hz (±10%) Dimensions (W x H x D) 483 x 89 x 255 mm (19" x 3.5" x 10") Weight 3.8 Kg (8.4 lb) * Power per channel tested under EIA standard ** Power tested under the condition of 40ms burst, 1KHz sine wave and 1% THD.

Lees meer minder

DPX1200 PFC Stereo Power Amplifier DPX PFC is a series of ultra-lightweight power amplifiers able to provide, for professional mobile and fixed PA systems, a huge amount of power and the maximum performance and portability in a very affordable package. Thanks to the high-density Class D technology employed in the output stages, we’ve been able to build very powerful amplifiers in an ultra-compact and lightweight package. The extremely efficient Switch Mode Power Supply (SMPS) with Power Factor Correction technology (PFC) helps to reduce further the weight and provides universal mains operation, delivering constant energy to the loudspeakers regardless of the AC line voltage fluctuations and eliminating the need for market specific power supplies and related reliability issues. All models feature a built-in 24dB/octave stereo crossover with BI-AMP and HIGH-PASS options, for easily filtering a 2-way system without the need of additional outboard. Fast-attack precise CLIP LIMITERS guarantee maximum output without distortion, while a comprehensive protection system safeguards both the speakers and the amplifier. The electronics is hosted in a feather-light all-aluminum case, able to provide an efficient cooling and, at the same time, protection and durability over the years. DPX PFC are power amplifiers offering extraordinary value to professional entertainers, DJ and sound engineers looking for massive output, excellent performance and absolute portability. High-density Class D technology Very efficient Switch Mode Power Supply (SMPS) with PFC Built-in 24dB/octave stereo crossover Extensive protection system for maximum reliability Integrated fast-attack CLIP LIMITERS STEREO / BRIDGE / PARALLEL mode XLR input and link connectors SPEAKON output connectors AC, DC, thermal, short-circuit and VHF protection Precise 8-segment LED ladders FRONT-TO-BACK cooling system with variable speed fan Ultra-lightweight all-aluminum chassis  TOTAL WEIGHT less than 5kg Technical specs: Power 8 ohm * 350 W Power 4 ohm * 600 W Power BRIDGE 8 ohm ** 1200 W Output Stage Class D Frequency response (+0.5/-0.5 dB) 20 Hz - 20 KHz Input Sensitivity +2.3 dBu / 1.0 Vrms GAIN (nominal/fixed) 36 dB Input Connectors / Impedance XLR-F (INPUT), XLR-M (LINK) / 20 Kohm (balanced), 10 Kohm (unbalanced) Output Connectors SPEAKON and Binding Post Damping Factor > 500 S/N Ratio (unweighted) > 100 dB THD+N < 0.15% Controls INPUT LEVEL, STEREO/BRIDGE-PARALLEL, FLAT/BI-AMP/HPF LED Indicators 7-LED BAR (ON, LIMIT, PROTECTION, -5dB / -10dB / -20dB / -40dB SIGNAL) Cooling Variable speed DC fan, air flow from front to rear Protections AC low power, DC, thermal, short circuit, VHF, CLIP limiter Mains Supply Voltage 100-240 VAC 50/60 Hz (±10%) Dimensions (W x H x D) 483 x 89 x 255 mm (19" x 3.5" x 10") Weight 3.8 Kg (8.4 lb) * Power per channel tested under EIA standard ** Power tested under the condition of 40ms burst, 1KHz sine wave and 1% THD.

Lees meer minder

Headphone AMP HPAMP106 The 100 Series is a range of D.I. Boxes and Headphone Amps designed to complement audio systems in stage applications, recording studios and fixed installations. Hosted in a stylish extruded and stackable aluminum shell or in a sturdy metal chassis, the 100 Series products are meant to deliver sound quality, versatility and stage-proof reliability in a very affordable package. 6 independent high-power amp sections suitable for any type of headphones 4 selectable main stereo/mono inputs with ¼” JACK connectors (REAR panel) 6 stereo headphone outputs with individual level controls , input selector and ¼” JACK connectors (FRONT panel) 300mW max output level at 32 ohm (per channel) Built-in power supply with toroidal transformer and voltage selector 19” rack mountable metal chassis Technical specs: Input Section   Inputs 4 stereo Input Impedance 47 Kohm Max Input Level +25 dBu Connectors  2 x 1/4" jack unbalanced (each input) Output Section   Outputs 6 stereo Maximum output (2x) 193 mW @ 32 ohm (each) Load Impedance minimum 16 ohm per channel Max gain +13 dB each channel Connector  1/4" jack stereo (each output) System Performance    Distortion (THD) 0.02 % Noise  < -98 dBu unweighted Frequency Response  20 Hz - 20 KHz (-3 dB) General    Controls OUTPUT LEVEL, INPUT SELECTOR Indicators Power ON Power supply Selectable 100-120 VAC, 220-240 VAC, 50-60 Hz Dimensions (W x H x D)  480 x 44 x 210 mm Weight 3,9 Kg

Lees meer minder

Headphone AMP HPAMP104 The 100 Series is a range of D.I. Boxes and Headphone Amps designed to complement audio systems in stage applications, recording studios and fixed installations. Hosted in a stylish extruded and stackable aluminum shell or in a sturdy metal chassis, the 100 Series products are meant to deliver sound quality, versatility and stage-proof reliability in a very affordable package. Very compact and portable package ¼” JACK + RCA stereo/mono input 4 x ¼” JACK stereo headphone outputs with individual level controls +22dB max output level (per channel) 10 ohm minimum output impedance  (per channel) Powered by DC adaptor (included) Technical specs: Input Section   Inputs 1 stereo Input Impedance 500 Kohm Max Input Level +15 dBu Connectors  1/4" jack stereo, 2 x RCA Output Section   Outputs 4 stereo Maximum output (2x) 45mW @ 100 ohm (each) Load Impedance minimum 16 ohm per channel Max gain +20 dB each channel Connector  1/4" jack stereo (each output) System Performance    Distortion (THD) 0.02 % Noise  < -98 dBu unweighted Frequency Response  20 Hz - 20 KHz (-3 dB) General    Controls OUTPUT LEVEL, INPUT STEREO/MONO Indicators Power ON Power supply 12-18 VDC (adapter included) Dimensions (W x H x D)  152 x 50 x 72 mm Weight 0,8 Kg

Lees meer minder

Passive Direct Injection Box DIRECT100P The 100 Series is a range of D.I. Boxes and Headphone Amps designed to complement audio systems in stage applications, recording studios and fixed installations. Hosted in a stylish extruded and stackable aluminum shell or in a sturdy metal chassis, the 100 Series products are meant to deliver sound quality, versatility and stage-proof reliability in a very affordable package. High quality isolation transformer for ultra-flat frequency response High quality electronic components ¼” JACK input and link connectors XLR-M balanced output 20dB & 40dB PAD and GND lift switch Stackable aluminum shell Technical specs: Input Section   Input Impedance >250 Kohm Max Input Level +10 (PAD at 0) / +30 (PAD at 20) / +50 (PAD at 40) dBu Connectors  1 x 1/4" jack unbalanced Link 1 x 1/4" jack unbalanced Output Section   Output  Transformer Balanced (isolated with shielding) Insertion Loss 26 dB Load Impedance 600 Ohms or greater Connector  XLR male System Performance    Distortion THD 50÷20k Hz 0dBu < 0.007 % Frequency Response  40 Hz to 20 kHz (-3 dB)  General    Controls PAD 0 / -20 / -40, GND LIFT Dimensions (W x H x D)  134 x 50 x 105 mm Weight (excluding batteries) 0,55 Kg

Lees meer minder

Active Direct Injection Box DIRECT100A The 100 Series is a range of D.I. Boxes and Headphone Amps designed to complement audio systems in stage applications, recording studios and fixed installations. Hosted in a stylish extruded and stackable aluminum shell or in a sturdy metal chassis, the 100 Series products are meant to deliver sound quality, versatility and stage-proof reliability in a very affordable package. Active Direct Injection Box High quality isolation transformer for ultra-flat frequency response Low-noise OP amps with high-quality sound performance XLR-F and ¼” JACK input connectors + ¼” JACK link - XLR-M balanced output 20dB PAD and GND lift switch Stackable aluminum shell Technical specs: Input Section   Input Impedance >250 Kohm Max Input Level +6 (PAD at 0) / +26 (PAD at 20) dBu Connectors  1 x XLR-F + 1 x 1/4" jack unbalanced Link 1 x 1/4" jack unbalanced Output Section   Output  Transformer Balanced (fully isolated) Insertion Loss 0 dB Load Impedance 600 Ohms or greater Connector  XLR male System Performance    Distortion THD 50÷20k Hz 0dBu < 0.005 % Noise  < -105 dBu unweighted  Frequency Response  10 Hz to 40 kHz (-3 dB)  General    Controls ON/OFF, PAD -20, GND LIFT Indicators Power ON Phantom Power  +18 volts DC to +48 volts DC  Battery  9 volt PP3 type alkaline Dimensions (W x H x D)  152 x 50 x 134 mm Weight (excluding batteries) 0,70 Kg

Lees meer minder