Good to have you here!
Our website uses cookies. By clicking on Accept you are agreeing to our terms of service and privacy policy.
Welcome to TH MUSIC
Pre-order
WX 10A Active Stage Monitor WX series stage monitors, with a perfect sound intelligibility, a high SPL and an ultra-compact format, can offer a professional yet affordable monitoring solution able to fit into stages of any size. The transducers’ coaxial design not only provides an optimal HF and LF alignment and a controlled directivity for a perfect listening from any position, but it also helps to minimize the size of the monitor. The ultra-compact enclosures, with integrated handle and pole socket, have been designed to feature a very low profile and, therefore, a minimal footprint on stage. The cabinets are finished with extra-strong polyurethane painting, making them resistant to any abuse. The lightweight 500W CLASS D amplifier module with SMPS provides a high output that results in an unexpected SPL for such small loudspeakers. The sophisticated analogue processing provides a detailed response, particularly in the vocal range, and a remarkable resistance to feedback. Two EQ PRESETS are available for the use of the speaker not only for stage monitoring (MONITOR), but also as a MAIN SOUND SYSTEM (FOH) if necessary. The WX monitors are available in two models, offering the right solution for different monitoring situations. The ultracompact WX8A can provide a high-quality monitoring also in very small spaces and it can give its best with speech, vocals and acoustic instruments. WX10A, with a higher SPL and a full-range response, is ideal for vocals, guitar, horns and electronic instruments or as a monitor for DJs. Active 2-way coaxial stage monitor 1” compression driver with 1” VC 10” woofer with 2” VC 500 W total power Class D power amplifier with SMPS Dual LIMITER circuit 2 optimized EQ PRESETS for MONITOR or FOH (Front-Of-House) use SPL MAX 123 dB Frequency response 70 Hz - 20 KHz Ultra-compact, lightweight cabinet with black ultra-durable polyurethane paint Reinforced metal grille Recessed handle for easy transport Pole socket Technical specs: System type 2-way coaxial vented stage monitor Low Frequency Device 10” woofer with 2"VC High Frequency Device 1” compression driver with 1"VC Angular Coverage 60° Frequency response 70 Hz - 20 kHz Max SPL at 1mt (peak) 123 dB Amplifier Continuous Power 250W CLASS D with SMPS Input Impedance 30 kohm balanced, 15 kohm unbalanced Input Sensitivity -10 dBu Controls LEVEL, PRESET selector (MONITOR, FOH), GND lift Connectors INPUT: COMBO (XLR-F/JACK), LINK: XLR-M Power Supply 230 VAC or 115 VAC - 50/60 Hz Rated Consumption* 200 W Construction MDF with black anti-scratch polyurethane paint Pole Adapter 1 x side Handles 1 x side Monitor taper 36° Weight 10 kg (22 lb) Dimensions (W x H x D) 390x396x270 mm * Rated consumption is measured with pink noise with a crest factor of 12 dB, this can be considered a standard music program.
Pre-order
WD 15A V2 Active Stage Monitor The WEDGE Series PROEL has set a standard for affordable and road-proof stage monitors, able to offer a highly valuable monitoring solution, with perfect sound intelligibility and high SPL in low-profile and portable enclosures. The Version 2 of this very successful series represents a major step forward, with several design’s refinements and feature’s improvements. The lightweight CLASS D amplifier modules with SMPS have been completely re-designed, to provide the utmost reliability even when the system is stressed at the highest sound pressure levels. Coupled to a sophisticated analog processing, they provide an extremely detailed response, particularly in the vocal range, and a remarkable resistance to feedback. Two tailored EQ PRESETS are available for the use of the speaker not only for stage monitoring (MONITOR), but also as a MAIN SOUND SYSTEM (FOH). The stylish design of the cabinets, with integrated handles, recessed connection panel and pole socket, has been optimized reducing further the profile and, therefore, the footprint on the stage. Knowing very well the mistreatment the stage monitors are usually subjected to, we have greatly improved the strength of the cabinet's polyurethane painting, making them resistant to any abuse. Also the custom designed coaxial transducers, able to provide a perfect HF and LF alignment and a controlled directivity for a perfect listening from any position, have been updated, especially the 10” that features now a compression driver with increased efficiency. The V2 WEDGE monitors are available in three models, offering the perfect solution for any monitoring situations. The ultra-compact WD10AV2 is able to offer a high-performance monitoring also on small stages and it ‘s the ideal solution for speech, vocals and keyboards. WD12AV2, with its high SPL and its full-range response, is the favorite choice for vocals, guitar, horns and electronic instruments or as a high-power monitor for DJs. WD15AV2, with its full extension and powerful and deep response at the low frequencies, is the ideal monitor for bass and drums players. The horn-loaded HF section and the powerful amplifier make it the perfect solution for monitoring also on very large stages. Active 2-way coaxial stage monitor 1” horn-loaded compression driver with 1.35” VC 15” woofer with 3” VC 450 W total power (900 W peak) 400 W class D + 50 W class AB power module with SMPS Dual LIMITER circuit 2 EQ PRESETS for Monitor or FOH (Front-Of-House) use SPL MAX 126 dB Frequency response 45 Hz - 20 KHzLow-profile, lightweight plywood cabinet with black ultra-durable polyurethane paint Reinforced metal grille with dust protection Recessed connection panel for added protection 2 recessed handles for easy transport Pole socket Technical specs: System type 2-way coaxial vented stage monitor Low Frequency Device 15” woofer with 3"VC High Frequency Device 1” compression driver with 1.35"VC Angular Coverage 60° Frequency response 45 Hz - 20 kHz Max SPL at 1mt (peak) 126 dB Amplifier Continuous Power HF: 50 W CLASS AB, LF: 400W CLASS D with SMPS Input Impedance 30 kohm balanced, 15 kohm unbalanced Input Sensitivity 0 dBu Controls LEVEL, PRESET selector (MONITOR, FOH), GND lift Connectors INPUT: COMBO (XLR-F/JACK), LINK: XLR-M Power Supply 230 VAC or 120 VAC - 50/60 Hz Maximum Consumption 575 W Rated Consumption* 300 W Construction Plywood with black anti-scratch polyurethane paint Pole Adapter 1 x side Handles 2 x sides Monitor taper 36° Weight 21 kg (46.3 lb) Dimensions (W x H x D) 600x335x490 mm * Rated consumption is measured with pink noise with a crest factor of 12 dB, this can be considered a standard music program.
Pre-order
WD 12A V2 Active Stage Monitor The WEDGE Series PROEL has set a standard for affordable and road-proof stage monitors, able to offer a highly valuable monitoring solution, with perfect sound intelligibility and high SPL in low-profile and portable enclosures. The Version 2 of this very successful series represents a major step forward, with several design’s refinements and feature’s improvements. The lightweight CLASS D amplifier modules with SMPS have been completely re-designed, to provide the utmost reliability even when the system is stressed at the highest sound pressure levels. Coupled to a sophisticated analog processing, they provide an extremely detailed response, particularly in the vocal range, and a remarkable resistance to feedback. Two tailored EQ PRESETS are available for the use of the speaker not only for stage monitoring (MONITOR), but also as a MAIN SOUND SYSTEM (FOH). The stylish design of the cabinets, with integrated handles, recessed connection panel and pole socket, has been optimized reducing further the profile and, therefore, the footprint on the stage. Knowing very well the mistreatment the stage monitors are usually subjected to, we have greatly improved the strength of the cabinet's polyurethane painting, making them resistant to any abuse. Also the custom designed coaxial transducers, able to provide a perfect HF and LF alignment and a controlled directivity for a perfect listening from any position, have been updated, especially the 10” that features now a compression driver with increased efficiency. The V2 WEDGE monitors are available in three models, offering the perfect solution for any monitoring situations. The ultra-compact WD10AV2 is able to offer a high-performance monitoring also on small stages and it ‘s the ideal solution for speech, vocals and keyboards. WD12AV2, with its high SPL and its full-range response, is the favorite choice for vocals, guitar, horns and electronic instruments or as a high-power monitor for DJs. WD15AV2, with its full extension and powerful and deep response at the low frequencies, is the ideal monitor for bass and drums players. The horn-loaded HF section and the powerful amplifier make it the perfect solution for monitoring also on very large stages. Active 2-way coaxial stage monitor 1” compression driver with 1.35” VC 12” woofer with 2.5” VC 350 W total power (700 W peak) 300 W class D + 50 W class AB power module with SMPS Dual LIMITER circuit 2 EQ PRESETS for Monitor or FOH (Front-Of-House) use SPL MAX 124 dB Frequency response 50 Hz - 20 KHz Low-profile, lightweight plywood cabinet with black ultra-durable polyurethane paint Reinforced metal grille with dust protection Recessed connection panel for added protection 2 recessed handles for easy transport Pole socket Technical specs: System type 2-way coaxial vented stage monitor Low Frequency Device 12” woofer with 2.5"VC High Frequency Device 1” compression driver with 1.35"VC Angular Coverage 80° Frequency response 50 Hz - 20 kHz Max SPL at 1mt (peak) 124 dB Amplifier Continuous Power HF: 50 W CLASS AB, LF: 300W CLASS D with SMPS Input Impedance 30 kohm balanced, 15 kohm unbalanced Input Sensitivity 0 dBu Controls LEVEL, PRESET selector (MONITOR, FOH), GND lift Connectors INPUT: COMBO (XLR-F/JACK), LINK: XLR-M Power Supply 230 VAC or 120 VAC - 50/60 Hz Maximum Consumption 445 W Rated Consumption* 235 W Construction Plywood with black anti-scratch polyurethane paint Pole Adapter 1 x side Handles 2 x sides Monitor taper 36° Weight 15 kg (33 lb) Dimensions (W x H x D) 510x310x440 mm * Rated consumption is measured with pink noise with a crest factor of 12 dB, this can be considered a standard music program.
Pre-order
WD 10A V2 Active Stage Monitor The WEDGE Series PROEL has set a standard for affordable and road-proof stage monitors, able to offer a highly valuable monitoring solution, with perfect sound intelligibility and high SPL in low-profile and portable enclosures. The Version 2 of this very successful series represents a major step forward, with several design’s refinements and feature’s improvements. The lightweight CLASS D amplifier modules with SMPS have been completely re-designed, to provide the utmost reliability even when the system is stressed at the highest sound pressure levels. Coupled to a sophisticated analog processing, they provide an extremely detailed response, particularly in the vocal range, and a remarkable resistance to feedback. Two tailored EQ PRESETS are available for the use of the speaker not only for stage monitoring (MONITOR), but also as a MAIN SOUND SYSTEM (FOH). The stylish design of the cabinets, with integrated handles, recessed connection panel and pole socket, has been optimized reducing further the profile and, therefore, the footprint on the stage. Knowing very well the mistreatment the stage monitors are usually subjected to, we have greatly improved the strength of the cabinet's polyurethane painting, making them resistant to any abuse. Also the custom designed coaxial transducers, able to provide a perfect HF and LF alignment and a controlled directivity for a perfect listening from any position, have been updated, especially the 10” that features now a compression driver with increased efficiency. The V2 WEDGE monitors are available in three models, offering the perfect solution for any monitoring situations. The ultra-compact WD10AV2 is able to offer a high-performance monitoring also on small stages and it ‘s the ideal solution for speech, vocals and keyboards. WD12AV2, with its high SPL and its full-range response, is the favorite choice for vocals, guitar, horns and electronic instruments or as a high-power monitor for DJs. WD15AV2, with its full extension and powerful and deep response at the low frequencies, is the ideal monitor for bass and drums players. The horn-loaded HF section and the powerful amplifier make it the perfect solution for monitoring also on very large stages. Active 2-way coaxial stage monitor 1” compression driver with 1” VC 10” woofer with 2” VC 250 W total power (500 W peak) 200 W class D + 50 W class AB power module with SMPS Dual LIMITER circuit 2 EQ PRESETS for Monitor or FOH (Front-Of-House) use SPL MAX 123 dB Frequency response 60 Hz - 20 KHz Low-profile, lightweight plywood cabinet with black ultra-durable polyurethane paint Reinforced metal grille with dust protection Recessed connection panel for added protection 2 recessed handles for easy transport Pole socket Technical specs: System type 2-way coaxial vented stage monitor Low Frequency Device 10” woofer with 2"VC High Frequency Device 1” compression driver with 1"VC Angular Coverage 80° Frequency response 60 Hz - 20 kHz Max SPL at 1mt (peak) 123 dB Amplifier Continuous Power HF: 50 W CLASS AB, LF: 200W CLASS D with SMPS Input Impedance 30 kohm balanced, 15 kohm unbalanced Input Sensitivity 0 dBu Controls LEVEL, PRESET selector (MONITOR, FOH), GND lift Connectors INPUT: COMBO (XLR-F/JACK), LINK: XLR-M Power Supply 230 VAC or 120 VAC - 50/60 Hz Maximum Consumption 315 W Rated Consumption* 165 W Construction Plywood with black anti-scratch polyurethane paint Pole Adapter 1 x side Handles 2 x sides Monitor taper 36° Weight 12 kg (26,4 lb) Dimensions (W x H x D) 490x265x375 mm * Rated consumption is measured with pink noise with a crest factor of 12 dB, this can be considered a standard music program.
Pre-order
Bags for Session Series Padded cover for S10 Padded cover for S12 Padded cover for S15 Padded cover for S18
Pre-order
S18 P Passive Subwoofer PROEL introduces the S Series, a new range of compact and powerful sub-woofers designed to complement PROEL full-range speakers. The variety of size, power and SPL offered by the four active S models provides, at an unbeatable price point, the perfect low extension solution for any speaker model available in the PROEL range.All the S models feature high-excursion woofers in a Hybrid Band Pass configuration (HBP). This innovative design provides a higher efficiency compared to direct radiation sub-woofers and, in addition, guarantees a much better coupling of the tuning ducts with the external air, reducing the distortion and the air turbulence, for a more defined sound and deep and punchy lows.The cabinets are built with 15/18mm plywood and finished with extra-durable polyurethane paint. They feature two flush handles and four sturdy 75mm wheels for an easy transport (S15 and S18 only). Compact passive HBP sub-woofer 18” woofer with 4” VC for a deep and extended response 500 W AES power SPL 1 W / 1 m 98 dB Frequency response 36 Hz - 140 H Technical specs: System type Hybrid Band Pass subwoofer Loudspeaker 18'' woofer with 4" VC Nominal Impedance 8 Ω Power Continuous (AES) 500 W Power Program 1000 W Power Peak 2000 W Frequency Response 36 Hz - 160 Hz Sensitivity 98 dB @ 1 W/1 m Connectors 2 x NEUTRIK SPEAKON (IN/LINK) Cabinet 15/18 mm plywood Black anti-scratch paint 1.5 mm metal grille 2 handles 1 x pole socket 4 x 75 mm wheels Dimensions (W x H x D) 508x630x645 (745 with wheels) mm Weight 33 kg (72.7 lb)
Pre-order
S18 A Active Subwoofer PROEL introduces the S Series, a new range of compact and powerful sub-woofers designed to complement PROEL full-range speakers. The variety of size, power and SPL offered by the four active S models provides, at an unbeatable price point, the perfect low extension solution for any speaker model available in the PROEL range.All the S models feature high-excursion woofers in a Hybrid Band Pass configuration (HBP). This innovative design provides a higher efficiency compared to direct radiation sub-woofers and, in addition, guarantees a much better coupling of the tuning ducts with the external air, reducing the distortion and the air turbulence, for a more defined sound and deep and punchy lows.The new CLASS D amplifier modules with SMPS (Switch Mode Power Supply) can generate a massive amount of continuous power in a compact, lightweight and reliable package. All the modules include a STEREO pre-amp section, 24dB/oct. crossover filters with selectable frequency and PHASE reverse switch.The cabinets are built with 15/18mm plywood and finished with extra-durable polyurethane paint. They feature two flush handles and four sturdy 75mm wheels for an easy transport (S15 and S18 only). Compact active HBP sub-woofer 18” woofer with 4” VC for a deep and extended response 1200 W peak power STEREO input, link and output SPL MAX 131 dB Frequency response 36 Hz - 140 Hz Technical specs: System type Hybrid Band Pass subwoofer Loudspeaker 18'' woofer with 4" VC Amplifier Continuous Power 600 W Frequency Response 36 Hz - 140 Hz Max SPL 131 dB Connectors IN: 2 x NEUTRIK COMBO OUT: 2 x NEUTRIK XLR-M LINK: 2 x NEUTRIK XLR-M Controls Volume, GND lift X-over Frequency, Phase Power Supply 230 VAC or 120 VAC 50/60 Hz Weight 36 kg (79.4 lb) Cabinet 15/18 mm plywood Black anti-scratch paint 1.5 mm metal grille 2 handles 1 x pole socket 4 x 75 mm wheels Dimensions (W x H x D) 508x630x645 (745 with wheels) mm
Pre-order
S15 P Passive Subwoofer PROEL introduces the S Series, a new range of compact and powerful sub-woofers designed to complement PROEL full-range speakers. The variety of size, power and SPL offered by the three passive S models provides, at an unbeatable price point, the perfect low extension solution for any speaker model available in the PROEL range.All the S models feature high-excursion woofers in a Hybrid Band Pass configuration (HBP). This innovative design provides a higher efficiency compared to direct radiation sub-woofers and, in addition, guarantees a much better coupling of the tuning ducts with the external air, reducing the distortion and the air turbulence, for a more defined sound and deep and punchy lows.The cabinets are built with 15/18mm plywood and finished with extra-durable polyurethane paint. They feature two flush handles and four sturdy 75mm wheels for an easy transport (S15 and S18 only). Compact passive HBP sub-woofer 15” woofer with 3” VC for a deep and extended response 400 W AES power SPL 1 W / 1 m 97 dB Frequency response 40 Hz - 160 Hz Technical specs: System type Hybrid Band Pass subwoofer Loudspeaker 15" woofer with 3" VC Nominal Impedance 8 Ω Power Continuous (AES) 400 W Power Program 800 W Power Peak 1600 W Frequency Response 40 Hz - 160 Hz Sensitivity 97 dB @ 1 W/1 m Connectors 2 x NEUTRIK SPEAKON (IN/LINK) Cabinet 15/18 mm plywood Black anti-scratch paint 1.5 mm metal grille 2 handles 1 x pole socket 4 x 75 mm wheels Dimensions (W x H x D) 435x570x560 (660 with wheels) mm Weight 24.5 kg (54 lb)
Pre-order
S15 A Active Subwoofer PROEL introduces the S Series, a new range of compact and powerful sub-woofers designed to complement PROEL full-range speakers. The variety of size, power and SPL offered by the four active S models provides, at an unbeatable price point, the perfect low extension solution for any speaker model available in the PROEL range.All the S models feature high-excursion woofers in a Hybrid Band Pass configuration (HBP). This innovative design provides a higher efficiency compared to direct radiation sub-woofers and, in addition, guarantees a much better coupling of the tuning ducts with the external air, reducing the distortion and the air turbulence, for a more defined sound and deep and punchy lows.The new CLASS D amplifier modules with SMPS (Switch Mode Power Supply) can generate a massive amount of continuous power in a compact, lightweight and reliable package. All the modules include a STEREO pre-amp section, 24dB/oct. crossover filters with selectable frequency and PHASE reverse switch.The cabinets are built with 15/18mm plywood and finished with extra-durable polyurethane paint. They feature two flush handles and four sturdy 75mm wheels for an easy transport (S15 and S18 only). Compact active HBP sub-woofer 15” woofer with 3” VC for a deep and extended response 1200 W peak power STEREO input, link and output SPL MAX 129 dB Frequency response 40 Hz - 160 Hz Technical specs: System type Hybrid Band Pass subwoofer Loudspeaker 15" woofer with 3" VC Amplifier Continuous Power 600 W Frequency Response 40 Hz - 160 Hz Max SPL 129dB Connectors IN: 2 x NEUTRIK COMBO OUT: 2 x NEUTRIK XLR-M LINK: 2 x NEUTRIK XLR-M Controls Volume, GND lift X-over Frequency, Phase Power Supply 230 VAC or 120 VAC 50/60 Hz Weight 26 kg (57.3 lb) Cabinet 15/18 mm plywood Black anti-scratch paint 1.5 mm metal grille 2 handles 1 x pole socket 4 x 75 mm wheels Dimensions (W x H x D) 435x570x560 (660 with wheels) mm
Pre-order
S12 A Active Subwoofer PROEL introduces the S Series, a new range of compact and powerful sub-woofers designed to complement PROEL full-range speakers. The variety of size, power and SPL offered by the four active S models provides, at an unbeatable price point, the perfect low extension solution for any speaker model available in the PROEL range.All the S models feature high-excursion woofers in a Hybrid Band Pass configuration (HBP). This innovative design provides a higher efficiency compared to direct radiation sub-woofers and, in addition, guarantees a much better coupling of the tuning ducts with the external air, reducing the distortion and the air turbulence, for a more defined sound and deep and punchy lows.The new CLASS D amplifier modules with SMPS (Switch Mode Power Supply) can generate a massive amount of continuous power in a compact, lightweight and reliable package. All the modules include a STEREO pre-amp section, 24dB/oct. crossover filters with selectable frequency and PHASE reverse switch.The cabinets are built with 15/18mm plywood and finished with extra-durable polyurethane paint. They feature two flush handles and four sturdy 75mm wheels for an easy transport (S15 and S18 only). Compact active HBP sub-woofer 12” woofer with 3” VC for a deep and extended response 1200 W peak power STEREO input, link and output SPL MAX 128 dB Frequency response 43 Hz - 160 Hz Technical specs: System type Hybrid Band Pass subwoofer Loudspeaker 12" woofer with 3" VC Amplifier Continuous Power 600 W Frequency Response 43 Hz - 160 Hz Max SPL 127dB Connectors IN: 2 x NEUTRIK COMBO OUT: 2 x NEUTRIK XLR-M LINK: 2 x NEUTRIK XLR-M Controls Volume, GND lift X-over Frequency, Phase Power Supply 230 VAC or 120 VAC 50/60 Hz Weight 19 kg (41.9 lb) Cabinet 15/18 mm plywood Black anti-scratch paint 1.5 mm metal grille 2 handles 1 x pole socket Dimensions (W x H x D) 360x500x520 mm
Pre-order
S10 A Active Subwoofer PROEL introduces the S Series, a new range of compact and powerful sub-woofers designed to complement PROEL full-range speakers. The variety of size, power and SPL offered by the four active S models provides, at an unbeatable price point, the perfect low extension solution for any speaker model available in the PROEL range.All the S models feature high-excursion woofers in a Hybrid Band Pass configuration (HBP). This innovative design provides a higher efficiency compared to direct radiation sub-woofers and, in addition, guarantees a much better coupling of the tuning ducts with the external air, reducing the distortion and the air turbulence, for a more defined sound and deep and punchy lows.The new CLASS D amplifier modules with SMPS (Switch Mode Power Supply) can generate a massive amount of continuous power in a compact, lightweight and reliable package. All the modules include a STEREO pre-amp section, 24dB/oct. crossover filters with selectable frequency and PHASE reverse switch.The cabinets are built with 15/18mm plywood and finished with extra-durable polyurethane paint. They feature two flush handles and four sturdy 75mm wheels for an easy transport (S15 and S18 only). Compact active HBP sub-woofer 10” woofer with 2” VC for a deep and extended response 700 W peak power STEREO input, link and output SPL MAX 119 dB Frequency response 46 Hz - 160 Hz Technical specs: System type Hybrid Band Pass subwoofer Loudspeaker 10" woofer with 2" VC Amplifier Continuous Power 350 W Frequency Response 46 Hz - 160 Hz Max SPL 119 dB Connectors IN: 2 x NEUTRIK COMBO OUT: 2 x NEUTRIK XLR-M LINK: 2 x NEUTRIK XLR-M Controls Volume, GND lift X-over Frequency, Phase Power Supply 230 VAC or 120 VAC 50/60 Hz Weight 14 kg (30.8lb) Cabinet 15/18 mm plywood Black anti-scratch paint 1.5 mm metal grille 2 handles 1 x pole socket Dimensions (W x H x D) 315x420x495 mm
Pre-order
LTX 8P Passive Loudspeaker system LTX is a complete series of active and passive speakers designed specifically for a a wide range of commercial and residential installations. The speaker systems are hosted in rugged plywood enclosures available in black or white and offering a refined and unobtrusive aesthetics, capable of fitting into any environment. All the cabinets feature multiple suspension points and dedicated accessories for a wide choice of mounting options. The KPTLTP bracket (included with LTX6 and LTX8) allows to install the speakers on walls and ceiling with variable tilt and swivel speaker orientation, offering the possibility to obtain a more uniform coverage of the audience. The C-shape brackets (for LTX10 and LTX12 models) allow to mount the speaker on walls, ceiling and stage structures for unobtrusive installation. LTX8, LTX10 and LTX12 are fitted with a standard pole adapter that allows to use the speaker also as a portable audio system with a standard floor speaker stand. For the high frequency reproduction we have designed symmetrical 90x90° dispersion horns, able to provide constant coverage for large audiences in both vertical and horizontal installations, and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offer an extended response with deep and tight basses. The active versions are powered by amplifiers featuring the latest technologies for amplification, such as Switch Mode Power Supply and CLASS D output stages, and providing a massive amount of power with reduced size and weight. They include a sophisticated pre-amp section with up to 24 dB/oct. phase aligned crossover filters and active EQ filters for the system’s fine tuning, together with POWERCON mains connectors. The HF and LF independent LIMITER circuits ensure an undistorted sound even at the loudest level and a total loudspeaker protection. Passive versions feature carefully designed linear phase crossover filters, HF protection circuits and SPEAKON connectors LTX8P 1” compression driver 8” woofer 90° H x 90° V coverage 160 W peak power handling Frequency response 70 Hz - 20 kHz SPL 1w/1m 92 dB Technical specs: System type 2-way vented enclosure High Frequency Device 1” compression driver with 1" VC Low Frequency Device 8” woofer with 1.5” VC Angular Coverage 90° H x 90° V Power Rating Continuous 160 W Power Rating Peak 320 W Impedance 8 ohm Frequency Response 70 Hz - 20 kHz SPL (1w / 1m) 92 dB Connectors 2 x SPEAKON Flying System 3 x M8, 3 x M6 Construction Plywood Cabinet Colour Black Handles 1 x rear Mounting Pole 1 x bottom Mounting Bracket Tilt and Swivel bracket (included)C-shape bracket (optional) Dimensions (W x H x D) 227 x 442 x 220 mm Weight 6.95 kg / 15.3 lbs
Our website uses cookies. By clicking on Accept you are agreeing to our terms of service and privacy policy.