Canopus
Canopus Vintage Snarewire 14"
71 in stock
From a warm whisper to a deep roar - Elevate your snare drum to its full potential The snare drum is the most important component in the drum set, and the snare-wire is a crucial component of your drum’s sound. This fact has not been widely recognized until very recently; only a few drummers understand this important connection. In 1960, Ludwig and Slingerland manufactured what has now become the standard for good vintage wires. Several manufacturers have tried to re-produce the sound. After years of research, we have replicated the Slingerland wire taking several factors into account such as material, spiral diameter and pitch. We finally decided on a core thickness of 0.5 mm, a spiral diameter of 1.35mm and a pitch of 3.4 mm. In that process, we also found that the end plate is another determinant of a snare-wire’s sensitivity, and we have tried various sizes for these as well. We concluded that 0.5mm is optimal to hold the wires. We also decided to exclude the guiding grooves for snare strings and tapes that most manufacturers use. These guiding grooves impaired the sensitivity of the snare drum. Our end plate is quite thin however; it may have caused breakage of strings and tapes. We resolved the problem by having the lapel at the holes on the end plate. After years of careful analysis of the material composition, thickness of the end plate, shaping experiments and production consideration, we have the CANOPUS Vintage Snare Wire.Super Jazz drummer Bill Stewart once visited us. He was so impressed by our proto-type Vintage Snare Wires he asked us if he could use it. Many CANOPUS endorsers appreciate the sound quality of this snare wire. 42 Strand Rich Impact These new Canopus 42 strand snare wires give a unique rich and full sound, and provide great impact.Having 42 strands may initially give an impression of being “too much”, but the VSW-42 wires feature ultra thin end plates – allowing players to enjoy maximum tone and response at all volume levels, whilst also providing great sensitivity and control over the sound. Players can enjoy a comfortably muted, tight sound and very quick response. * 0.5mm thick Brass End Plate* Vintage Wire 42 Strand* Dry (DR) Only
Canopus BackBeat Snarewire
45 in stock
Snare wires which enhance even the subtitles of nuances in the midst of very loud backbeats! By adopting spiral wires with an abundance of coils coupled with 1mm end-plates, we have achieved a good balance between volume that is aggressive enough for a powerful backbeat and swift response for delicate phrasing. With this one snare wire, you can hav a an aggressive, loud snare sound and maintain sensitivity. CPSS-BB14DR(Dry=Without plating) These snare wires create a loud attack and sharp response even for ghost notes. Very effective for wood-shell snare drums. CPSS-BB14NP(Nickel plated) These snare wires have both a loud attack and bright sound. They have an enormous effect on metal-shell snare drums. They will improve the potential of a loud snare tremendously. CPSS-BB14SNPW (Nickel Plated) Canopus Back Beat snare wires have been developed to emphasize the back-beat – especially in high volume situations where the snare sound may feel like it is being buried by other instruments.Maintaining these qualities of the standard Canopus Back Beat wires, we have developed the extra wide 42 strand snare wire – which allows the drummer to play comfortably, without straining, while delivering a full, pleasing snare back-beat at all volume levels. We have eliminated 2 common problems of other wide snares: 1) Canopus 42 strand snare wires do not mute the resonance and response of the drum. 2) We have controlled the indistinct sound created by excess snare buzz. Furthermore, the 42 strand snare uses high quality nickel plated wires which highlight every nuance of sound and vibration and yet have a controlled response and sustain. Enjoy the open, powerful and responsive sound.
Canopus Vintage Snarewire 13"
22 in stock
From a warm whisper to a deep roar - Elevate your snare drum to its full potential The snare drum is the most important component in the drum set, and the snare-wire is a crucial component of your drum’s sound. This fact has not been widely recognized until very recently; only a few drummers understand this important connection. In 1960, Ludwig and Slingerland manufactured what has now become the standard for good vintage wires. Several manufacturers have tried to re-produce the sound. After years of research, we have replicated the Slingerland wire taking several factors into account such as material, spiral diameter and pitch. We finally decided on a core thickness of 0.5 mm, a spiral diameter of 1.35mm and a pitch of 3.4 mm. In that process, we also found that the end plate is another determinant of a snare-wire’s sensitivity, and we have tried various sizes for these as well. We concluded that 0.5mm is optimal to hold the wires. We also decided to exclude the guiding grooves for snare strings and tapes that most manufacturers use. These guiding grooves impaired the sensitivity of the snare drum. Our end plate is quite thin however; it may have caused breakage of strings and tapes. We resolved the problem by having the lapel at the holes on the end plate. After years of careful analysis of the material composition, thickness of the end plate, shaping experiments and production consideration, we have the CANOPUS Vintage Snare Wire.Super Jazz drummer Bill Stewart once visited us. He was so impressed by our proto-type Vintage Snare Wires he asked us if he could use it. Many CANOPUS endorsers appreciate the sound quality of this snare wire.
Canopus Snare Wire Parts
21 in stock
Nylon Snare Wire Belt (CNB) We have selected flexible nylon fiber for its excellent durability in a woven belt. With this innovative snare belt, we got a natural response of a snare wire similar to the snare wire cord, and what is more, the choked sound caused by conventional film belt is not noticed at all. Snare Wire Cord (CNC) This is an ideal cord for a sustaining, “natural bound” and “stabilizing” snare wire. The only drawback used to be a sudden break of the string while in use.Canopus has conducted research into core fiber material, thread volume and weaving technique to come up with a very durable snare cord with natural bound (compared with our products in the past).The fitting of these snare wires have vastly improved whether loosely or tightly adjusted. This is a most suitable item for situations where delicacy is required (in a recording for instance).
Canopus Bolt Tight
25 in stock
By combining Bolt-Tight and Red-Lock, you have our “Iron-Wall Guard” to ensure that even tuning and consistent sound are retained through even the most punishing performances.
Canopus Vintage Snarewire Ludwig SS and Slingerland Radio King
Pre-order
Super Sensitive snare wires Canopus Vintage snare wires are now available for Ludwig Super Sensitive drums made after 1968!The dry, warm tone of these wires brings out the original soothing and pleasant sound of these vintage drums.These wires not only give a deep, unified sound – they also provide remarkable sensitivity – making them a “must have” item for lovers of vintage snare drums.(These can also be used for YAMAHA 70’s parallel action drums SD-055M and 065M) Radio King “Clamshell” snare wires Great news for Slingerland Radio King users!Snare wires for exclusive use on Radio King 14” snare drums with “Clamshell” strainer are now available from Canopus.The sound of these wires blends beautifully with the sound of 1ply maple and faithfully reproduces the classic “fat” and “dry” sound.For anyone who is looking for a tone that is as close as possible to the original snare sound, these snare wires are essential!
Canopus Canopus Flat base snare stand
Pre-order
Maximum compactness and portability The flat-base snare stand was developed with compactness and portability as priorities.The basket angle adjustment is now gearless, making it even easier to use.Together with the Flat Base Cymbal Stand, it will help you carry them around with ease.The flat base is also convenient for setting up when used as a tom stand. When Folded : 13” (330mm)Weight : 2.2kg (4.85lb)H≒17”〜24” (430mm 〜610mm)
Canopus 1 Ply snare drum
Pre-order
What is 1ply Series? When we look back on the history of snare drums we see a transition of crafting techniques. From hollowed one piece shell, to 1 ply shell, to plywood shell with reinforcement, plywood shell without reinforcement, and then block shell construction. Though this transition was in the pursuit of efficiency, each method of construction has resulted in a different sound. Through Canopus’ research into the various combinations of materials, number of plies, and reinforcement we have continued to introduce a variety of new drums. With the Zelkova snare drum Canopus has presented the ultimate sound for a one piece, hollowed shell. The notable characteristics of a 1-ply shell are a deep sound and pure tone. It has been a new challenge for Canopus to take advantage of these qualities and create new instruments displaying the diverse sound character of different wood materials. The 1ply Oak Snare Drum White Oak is very familiar to drummers as a material for drumsticks. The primary characteristics of oak are its hardness and resilience. The unique combination of hardness and density provides superior projection. The sound has a perfect balance of both high and low end frequencies. The White Oaks snare drum gives a unique sound – powerful tone and projection. Lugs: Chrome Hoop: High End Vintage Hoop / 8 Snarewire: Vintage CPSL-14DR Shell: 1ply Oak 4,5mm / reinforcement hoops High Edge HoopWith a height of 20.5mm these hoops offer direct sound projection and focused sound. These hoops will respond to different stick positions to produce a wide variety of rim shot sounds. The 1ply Maple Snare Drum It is generally recognized that, when compared to plywood, a single-ply maple shell gives a softer, warmer sound. However, due to the drying process, many single-ply shells have a dominant high frequency which is somewhat unpleasant to the ear. We searched for the ideal material to overcome this obstacle – and it came true when we met master wood-craftsman, Mr.Anton Sutej. The material he has chosen – “Soft Maple” features an unmatched softness – its very nature gives the classic, vintage sound – with a sense of nostalgia that transcends history and time. It provides a smoothness of sound not usually found in modern drums. SSSM is brought to life by the fusion of our soft maple material and the unique techniques of Canopus. It comes equipped with our newly developed nickel plated Brass Straight Hoops as standard feature. The classic, vintage sound of the “good old days” – highly sought in “collectors item” drums has been reproduced by Canopus. Lug: Chrome Hoop: Brass Straight Hoop / 8 Snarewire: Vintage CPSL-14DR Shell: 1ply soft maple 5.5mm / reinforcement hoops Finish: oil, wrap or lacquer Brass Straight HoopThe distinctive character of brass hoops is a soft and pure sustain – perfectly suited to the reproduction of the classic, vintage sound. Strainer A nylon nut is built in the strainer switch CSA-20S.Canopus’ switch is so designed to prevent “loosening of snare wire” during the performance by creating moderate friction on the tension adjustment dial by the torque controlled nylon nut.
Canopus Speed Master Bearing
Pre-order
Blazing Speed, incredible durability! The Speed Star Bearing that swept the world in the early 1990s has returned! Light, smooth pedal movement with incredible durability can be yours by simply replacing the existing parts on certain pedals with our new Speed Star Bearings. ※All stainless steel (SUS304) construction for durability and dependable performance. ※Unmatched speed and sensitivity from our crank-spring screw and rocker-hub design.(SS-5000) Materials:Rocker Hub: Stainless SUS304Bearing: Stainless SUS304Bearing Case: Stainless SUS304Crank-Spring Screw: Stainless SUS304
Canopus Canopus Flat base Hihat stand
Pre-order
Light weight Hi-Hat Stand Light weight hardware often gives the impression that it is cheap, not functional or durable enough. The Canopus lightweight hardware was engineered to provide effective function and durability for professional use, utilizing space age concepts that enhance performance. 1- With minimal pipe diameter and minimum leg width, the total weight is only 2.8Kg.2- Rotation mechanism at leg, which allows enough space for double pedal setting3- With Spring Adjustment Function4- A bearing has been adopted at the contact point of chain and shaft to ensure smoother movement.5- With anchor for reliable pedal fixture.6- New mechanism to prevent unwanted movement at hinge Weight: 2.8kg (6.17lb)H≒740mm~870mm (29.13″~34.25″)Tube dia. φ19mm/16mm
Canopus Canopus Jeff Hamilton Flat base Cymbal stand
Pre-order
The artist’s ideal perfected.The ultimate in versatility. This cymbal stand has been developed based on Jeff Hamilton’s requests for a stand to suit all his practical requirements.It can be folded to a very small size, features a gearless tilter, plastic tilter sleeve, and pipe caps which eliminate metal-against-metal noise.Furthermore, it features a thinner 6mm tilter shaft allowing it to accomodate vintage cymbals. Stored Length : 595mm (23.5”)Weight : 1.8kg (3.96lb)H≒670mm ~ 1400mm (26.37” ~ 55.11”)Tube dia. φ19mm/16mm/13mmTilter Shaft dia. φ6mm “I’m happy that Canopus has designed a lightweight stand that has everything I need. It’s sturdy, flat base, gearless tilt and thin tilter shaft is well-made and easy to use product.” Jeff Hamilton He’s been active as a top drummer in the jazz world for a long time and participated in Monty Alexander Trio and Woody Hermann Orchestra since 1975.He has done six albums as a member of The LA Fort, and has been with such artist as Ella Fitzgerald, Count Basie Orchestra, Oscar Peterson Trio to name a few.As a leader, he has his own group named The Clayton-Hamilton Jazz Orchestra.He gains great trust from singers and players.