'A legendary drum builder worthy of its name'Â
Â
Welcome to TH MUSIC
'A legendary drum builder worthy of its name'Â
Â
Pre-order
The 1.5mm-thick brass shell gives a much more solid sound than its appearance may suggest - providing the perfect blend of rich depth, balanced mid-low frequencies and great projection. Its sound far exceeds expectations for this type of snare - and meets all the demands of today's music scene. It comes standard with a baseball bat-type, 3-position inner muffler for enhanced playability and a variety of personalized sounds. The sound is the result of a perfect balance of shell material and thickness, bearing edge design and lapel length. It is undoubtedly going to be a hit with many players.
Pre-order
NV60-M1 Snare Drum Revive The 60’s Jazz Sound With our NV60 M1 snare drum we have achieved the perfect balance between the classic, vintage sound of the 1960’s and the expectations of modern snare performance and design. Its rich, sophisticated sound suits it to a wide range of musical genres. A major attraction of the NV60-M1 is its wider tuning range – which one is unlikely to experience with vintage drums.   NO. NV60M1S-1455 (14"x5.5") NV60M1S-1465 (14"x6.5") LUG: Brass HOOP: Die-Cast/8 SNARE WIRE: Vintage Snare Wire [CPSL-14DR] SHELL: 7Ply Maple+Poplar 7.5mm FINISH: Oil / Wrapping / Lacquer
1 in stock
NV60-M2 Snare Drum For our NV60-M2, we analyzed the drum sound that stormed the rock world in the 1960’s. The shell construction is made of 3 ply mahogany and poplar with a maple reinforcement.Thin 1.6mm pressed hoops that are customized for the NV60-M2 shells further refine the vintage sound.The attack sounds from the surface of the head father than the point to create an immediate response with sticks and beaters. Crisp and clear sounds recreate the nostalgic sensation of a vintage rock kit and cleanly articulate every audible stroke. *We recommend as the standard specification for the NV60-M2 without bolt-tight washers since we put more emphasis on the reproduction of the vintage sound of 1960s. Â
Pre-order
The Zelkova Snare Drum, which has a hollowed one piece drum shell, can be described as the purest form of the drum. Only one hollowed piece can be taken from a stump of precious 200 year old Zelkova wood, also called Akagi or “red wood.” The sound that is produced from a single piece of wood has a unique and powerful attack. Each stroke produces a “block of sound” with a sharp edge and a thick low pitch, while maintaining the warmth of natural wood. The special nature of Zelkova is highly revered and sought after by top drummers around the world. CANOPUS and the Zelkova Snare Drum Project  The Zelkova snare drum is CANOPUS’ flagship model. In the primary development process we first experimented with traditional drum crafting theory. We cut the drum’s edge at an angle of 45 degrees on both the inside and outside of the shell. Our first try was insufficient; the drum lacked the resonance and sensitivity we were looking for. We continued to experiment with several different edge angles, including 60 and 70 degrees. After some trial and error, we achieved an unprecedented edge shaping process. The end result is a hand crafted snare drum with maximum resonance and a delicate yet fat sound with sharp response. (See picture) Our new edge shaping is very sharp. This overturns existing edge shaping theory. In order to pull the best sound out of the drum, the edge shaping must be determined by the material, thickness and structure of the shell. These findings have contributed to CANOPUS’ overall development policy and shaped our attitude towards the drum crafting process, prompting us to constantly.challenge the status quo, disregarding convention in favor of innovation. Why are most snare drums made of plywood? In order to pull out the best natural resonance. it is essential that the vibrating object must consist of a single element. In other words. a hollowed solid piece of wood is the ideal drum shell. When you compare the resonance of a piece of solid wood to a piece of plywood the difference in sound quality is obvious.A one piece snare drums is very fragile due to its construction.To cover up these shortcomings plywood shells are widely utilized. By plying several pieces of wood together with glue the drum shell is several more times durable than a one-piece shell. Consequently. natural resonance is impaired in exchange for durability. Throughout the world, drum manufacturers have tried several approaches to combat the issue of a single element and durability.Segmented shells are one approach and are closer to a one-piece shell. Another approach is to place a reinforcement hoop inside the bent piece of wood. One-piece wood is the most ideal in terms of pulling out the specific natural resonance. Because of technical problems such as shell alteration and cracking, which may occur several years after the drums production, only a few manufacturers are producing hollowed one-piece wood snare drums.             * Since its debut, precious 200-year old redwood has been used for Zelkova Snare Drums. This material has become scarce in recent years, thus procurable quantities are yearly decreasing.  A new revolving height adjustable tubular lug           Zelkova snare drum, the flagship model of Canopus which has enjoyed tremendous support since its introduction, has now unveiled a new revolving height adjustable tubular lug as a standard feature. The Zelkova snare drum features a hollowed one piece shell made from a stump of precious 200 years old Zelkova wood. The wood is seasoned for three years and moisture content is regulated down to 9 percent in a specially designed wood drier . However, this shell may still be affected by outside humidity, and may display a degree of contraction and expansion. The diameter of the shell increases when the humidity is high, and decreases when humidity is low. Since commonly used lugs have a swivel feature to accomodate the tension bolts, it wouldn’t matter if the drum shell expands or contracts. However, the Canopus tube lug has no swivel feature – it is a solid structure in order to enhance vibration cycle efficiency. Sometimes, when expansion and contraction occurs on the shell, perfect alignment of the tension bolts and lugs may prove difficult A new revolving height adjustable tubular lug has been designed in order to solve this problem. It has a mechanism which enables the user to adjust at the height of the lug by plus or minus 2mm by simply turning the center pole. We do not put any grommets in the air hole of Zelkova snare drums for the following reasons: 1. We would prefer not to put any kind of hardware on the Zelkova, so we eliminate any extraneous metal or wood to preserve the resonance of the drum.2. The wood can shrink, causing the grommet to rattle. The shell expands and contracts in response to temperature and moisture. Canopus takes every precaution to minimize drum shell shrinkage. Even though we dry the Zelkova snare drum shell until the moisture content is at 9% and the Zelkova snare drums shell is made without a seam (it’s made from one, non-comprised piece of wood), there is a possibility that the shell could still shrink or expand due to the changes in air moisture.3. Just look inside the air hole and you can appreciate the thickness of the single piece of wood.   Specs: HS-1450 (14"x5") HS-1465 (14"x6.5") HS-1480 (14"x8") Finish: Ninja Black Lacquer Lugs: Brass Hoop: Die-Cast / 8 Snare Wire: Vintage Snare Wire (CPSL-ZL14NP) Shell: One-Piece Hollowed Zelkova 14mm
Pre-order
What is 1ply Series? When we look back on the history of snare drums we see a transition of crafting techniques. From hollowed one piece shell, to 1 ply shell, to plywood shell with reinforcement, plywood shell without reinforcement, and then block shell construction. Though this transition was in the pursuit of efficiency, each method of construction has resulted in a different sound. Through Canopus’ research into the various combinations of materials, number of plies, and reinforcement we have continued to introduce a variety of new drums. With the Zelkova snare drum Canopus has presented the ultimate sound for a one piece, hollowed shell. The notable characteristics of a 1-ply shell are a deep sound and pure tone. It has been a new challenge for Canopus to take advantage of these qualities and create new instruments displaying the diverse sound character of different wood materials. The 1ply Oak Snare Drum White Oak is very familiar to drummers as a material for drumsticks. The primary characteristics of oak are its hardness and resilience. The unique combination of hardness and density provides superior projection. The sound has a perfect balance of both high and low end frequencies. The White Oaks snare drum gives a unique sound – powerful tone and projection. Lugs: Chrome Hoop: High End Vintage Hoop / 8 Snarewire: Vintage CPSL-14DR Shell: 1ply Oak 4,5mm / reinforcement hoops High Edge HoopWith a height of 20.5mm these hoops offer direct sound projection and focused sound. These hoops will respond to different stick positions to produce a wide variety of rim shot sounds.   The 1ply Maple Snare Drum It is generally recognized that, when compared to plywood, a single-ply maple shell gives a softer, warmer sound. However, due to the drying process, many single-ply shells have a dominant high frequency which is somewhat unpleasant to the ear. We searched for the ideal material to overcome this obstacle – and it came true when we met master wood-craftsman, Mr.Anton Sutej. The material he has chosen – “Soft Maple” features an unmatched softness – its very nature gives the classic, vintage sound – with a sense of nostalgia that transcends history and time. It provides a smoothness of sound not usually found in modern drums. SSSM is brought to life by the fusion of our soft maple material and the unique techniques of Canopus. It comes equipped with our newly developed nickel plated Brass Straight Hoops as standard feature. The classic, vintage sound of the “good old days” – highly sought in “collectors item” drums has been reproduced by Canopus. Lug: Chrome Hoop: Brass Straight Hoop / 8 Snarewire: Vintage CPSL-14DR Shell: 1ply soft maple 5.5mm / reinforcement hoops Finish: oil, wrap or lacquer Brass Straight HoopThe distinctive character of brass hoops is a soft and pure sustain – perfectly suited to the reproduction of the classic, vintage sound. Strainer A nylon nut is built in the strainer switch CSA-20S.Canopus’ switch is so designed to prevent “loosening of snare wire” during the performance by creating moderate friction on the tension adjustment dial by the torque controlled nylon nut.  Â
Pre-order
The dry, seasoned sound of an aged instrument. White Ash was the material widely used to make Fender guitars until the middle of 1950s. Strong attack and quick response are the primary characteristics of this material. Since ash wood is relatively rigid, and challenging to process, its use for musical instruments has gradually decreased over time. On the other hand, it shows some favorable characteristics – displaying a well balanced nature, both in resiliency and hardness. Of all woods ash has the best strength to weight ratio – making it the wood of choice for baseball bats. Its wonderful bending properties make it popular for fine woodworking and furniture making. These qualities combine to make it an ideal material for strong, light, resonant drums. We have combined the ash material with poplar and, using Canopus’ original processing technique for the bearing edges, this has enabled us to create a drum sound with a “seasoned taste” to it. Now, you can enjoy a vintage-like sound which is both dry and resilient. It displays a full low frequency response, short sustain and clear projection. Playing these drums will give you a comfortable feeling of familiarity – like the sound and feel of an instrument you have known for many years. Furthermore, the natural beauty of the ash woodgrain, when colored, is particularly attractive.
Pre-order
NV60-M5 Snare Drum Power & Tone The sound that was loved back in the 60’s by drummers in many genres, such as Jazz, Rock and R&B, has come back to life!We managed to produce a thick and warm sound by applying Canopus’ original edge shaping method to European Maple shells. Additionally, the classic combination of uniquely shaped reinforcement rings, flat gray interior coating, and inner muffler has been reproduced. The sound of power and tone from that era is back!  NO. NV60M5S-1450 (14"x5") NV60M5S-1465 (14"x6.5") COLOR Black Onyx Blue Onyx LUG: Japanese Sword (Yaiba) Lug HOOP: 1.6mm Steel Hoop SNARE WIRE: Vintage Snare Wire [CPSL-14DR] SHELL: 5ply Maple 5mm w/ R.F. FINISH: Wrapping Â
Pre-order
NV50-M1 Snare Drum Hear and Feel a full, focused sound with every stroke The driest sound of our Neo Vintage Series.Our Maple and Gumwood 3-ply shell, with Canopus original bearing edge shape – perfectly matched with brass straight hoops. This unique drum provides the “driest” sound of our Neo Vintage Series. Canopus has managed to capture and improve upon the classic 1950’s sound.The shell construction is Maple Gumwood 3ply with Canopus original bearing edge shape. Brass straight hoops bring out the full potential of this snare drum.With every stroke you can hear and feel the full, focused sound.Playing this brand new snare drum you will experience the classic and sought after vintage sound of the “good old days”. This is THE Neo Vintage! NO. NV50M1S-1455 (14"x5.5") NV50M1S-1465 (14"x6.5") LUG: Brass HOOP: Brass Straight Hoop / 8 SNARE WIRE: Vintage Snare Wire (CPSL-14DR) SHEL:  3ply Maple + Gumwood 8mm FINISH: Wrap Â
1 in stock
 YAIBA II  Birch Snare Drum Although the Yaiba II drum set was originally sold with a snare drum, Canopus started producing the Yaiba snare drums individually because of high demand from drummers.Canopus adopted the use of forced-hardening lacquer instead of nitrocellulose lacquer for a solid and powerful sound, and has managed to create a sound which contrasts and complements the other Canopus high end series. The YAIBA models have inherited the great Canopus sound and have also specialized and refined the concept of the original YAIBA – but they sit in a much more affordable price range. This is a “dream come true” for those drummers who have always wanted to easily have the Canopus sound. JSB-1455 (14"x5.5") - JSB-1465 (14"x6.5") LUG: Yaiba Sword Lug (Chrome) HOOP: 2.3mm Power Hoop / 8H SNARE WIRE: Vintage Snare Wire (CPSL-14DR) SHELL:  All Birch 6ply DRUMHEAD: USA REMO (COATED AMBASSADOR)  Â
1 in stock
 YAIBA II  Maple Snare Drum Although the Yaiba II drum set was originally sold with a snare drum, Canopus started producing the Yaiba snare drums individually because of high demand from drummers.Canopus adopted the use of forced-hardening lacquer instead of nitrocellulose lacquer for a solid and powerful sound, and has managed to create a sound which contrasts and complements the other Canopus high end series. The YAIBA models have inherited the great Canopus sound and have also specialized and refined the concept of the original YAIBA – but they sit in a much more affordable price range. This is a “dream come true” for those drummers who have always wanted to easily have the Canopus sound. JSM-1455 (14"x5.5") - JSM-1465 (14"x6.5") LUG: Yaiba Sword Lug (Chrome) HOOP: 2.3mm Power Hoop / 8H SNARE WIRE: Vintage Snare Wire (CPSL-14DR) SHELL:  All Maple 6ply DRUMHEAD: USA REMO (COATED AMBASSADOR)  Â
Our website uses cookies. By clicking on Accept you are agreeing to our terms of service and privacy policy.