SNAREDRUM

1mm stainless steel shell Ral Color of choice Standard features: Triple flange 2,3mm hoops. Muffler Brass chrome custom lugs by Steeldrum. Gibraltar strainer. Bronze snare wires 16 or 20 wires. Remo Ambassador and resonant drum heads. Soft Bag If you have any other requests please contact us

Read more less

E-Trix Triggers available in set: Contains: 1x Stereo trigger, 4x mono trigger, 5x Onyx Black SkyGels Single: Stereo - Dual trigger Mono  trigger All Triggers are  supplied with small double-sided tape for use with some mesh heads

Read more less

  By combining Bolt-Tight and Red-Lock, you have our “Iron-Wall Guard” to ensure that even tuning and consistent sound are retained through even the most punishing performances.

Read more less

It enables you to angle it at 3 different positions.

Read more less

Stainless Steel shell 1 mm  brilliant & Satin Finish Standard features:Triple flange 2,3mm hoops. Brass chrome custom lugs by Steeldrum. Gibraltar strainer. Bronze snare wires 16 or 20 wires. Remo Ambassador and resonant drum heads.   Please contact us if you have any other special requests 

Read more less

The 1.5mm-thick brass shell gives a much more solid sound than its appearance may suggest - providing the perfect blend of rich depth, balanced mid-low frequencies and great projection. Its sound far exceeds expectations for this type of snare - and meets all the demands of today's music scene.  It comes standard with a baseball bat-type, 3-position inner muffler for enhanced playability and a variety of personalized sounds. The sound is the result of a perfect balance of shell material and thickness, bearing edge design and lapel length. It is undoubtedly going to be a hit with many players.

Read more less

What is 1ply Series? When we look back on the history of snare drums we see a transition of crafting techniques. From hollowed one piece shell, to 1 ply shell, to plywood shell with reinforcement, plywood shell without reinforcement, and then block shell construction. Though this transition was in the pursuit of efficiency, each method of construction has resulted in a different sound. Through Canopus’ research into the various combinations of materials, number of plies, and reinforcement we have continued to introduce a variety of new drums. With the Zelkova snare drum Canopus has presented the ultimate sound for a one piece, hollowed shell. The notable characteristics of a 1-ply shell are a deep sound and pure tone. It has been a new challenge for Canopus to take advantage of these qualities and create new instruments displaying the diverse sound character of different wood materials. The 1ply Oak Snare Drum White Oak is very familiar to drummers as a material for drumsticks. The primary characteristics of oak are its hardness and resilience. The unique combination of hardness and density provides superior projection. The sound has a perfect balance of both high and low end frequencies. The White Oaks snare drum gives a unique sound – powerful tone and projection. Lugs: Chrome Hoop: High End Vintage Hoop / 8 Snarewire: Vintage CPSL-14DR Shell: 1ply Oak 4,5mm / reinforcement hoops High Edge HoopWith a height of 20.5mm these hoops offer direct sound projection and focused sound. These hoops will respond to different stick positions to produce a wide variety of rim shot sounds.     The 1ply Maple Snare Drum It is generally recognized that, when compared to plywood, a single-ply maple shell gives a softer, warmer sound. However, due to the drying process, many single-ply shells have a dominant high frequency which is somewhat unpleasant to the ear. We searched for the ideal material to overcome this obstacle – and it came true when we met master wood-craftsman, Mr.Anton Sutej. The material he has chosen – “Soft Maple” features an unmatched softness – its very nature gives the classic, vintage sound – with a sense of nostalgia that transcends history and time. It provides a smoothness of sound not usually found in modern drums. SSSM is brought to life by the fusion of our soft maple material and the unique techniques of Canopus. It comes equipped with our newly developed nickel plated Brass Straight Hoops as standard feature. The classic, vintage sound of the “good old days” – highly sought in “collectors item” drums has been reproduced by Canopus. Lug: Chrome Hoop: Brass Straight Hoop / 8 Snarewire: Vintage CPSL-14DR Shell: 1ply soft maple 5.5mm / reinforcement hoops Finish: oil, wrap or lacquer Brass Straight HoopThe distinctive character of brass hoops is a soft and pure sustain – perfectly suited to the reproduction of the classic, vintage sound. Strainer A nylon nut is built in the strainer switch CSA-20S.Canopus’ switch is so designed to prevent “loosening of snare wire” during the performance by creating moderate friction on the tension adjustment dial by the torque controlled nylon nut.    

Read more less

Copper 1 mm shell - Vintage Patina Finish Standard features: Triple flange 2,3mm hoops. Brass chrome custom lugs by Steeldrum. Gibraltar strainer. Bronze snare wires 16 or 20 wires. Remo Ambassador and resonant drum heads. Soft Bag

Read more less

The Zelkova Snare Drum, which has a hollowed one piece drum shell, can be described as the purest form of the drum. Only one hollowed piece can be taken from a stump of precious 200 year old Zelkova wood, also called Akagi or “red wood.” The sound that is produced from a single piece of wood has a unique and powerful attack. Each stroke produces a “block of sound” with a sharp edge and a thick low pitch, while maintaining the warmth of natural wood. The special nature of Zelkova is highly revered and sought after by top drummers around the world. CANOPUS and the Zelkova Snare Drum Project   The Zelkova snare drum is CANOPUS’ flagship model. In the primary development process we first experimented with traditional drum crafting theory. We cut the drum’s edge at an angle of 45 degrees on both the inside and outside of the shell. Our first try was insufficient; the drum lacked the resonance and sensitivity we were looking for. We continued to experiment with several different edge angles, including 60 and 70 degrees. After some trial and error, we achieved an unprecedented edge shaping process. The end result is a hand crafted snare drum with maximum resonance and a delicate yet fat sound with sharp response. (See picture) Our new edge shaping is very sharp. This overturns existing edge shaping theory. In order to pull the best sound out of the drum, the edge shaping must be determined by the material, thickness and structure of the shell. These findings have contributed to CANOPUS’ overall development policy and shaped our attitude towards the drum crafting process, prompting us to constantly.challenge the status quo, disregarding convention in favor of innovation. Why are most snare drums made of plywood? In order to pull out the best natural resonance. it is essential that the vibrating object must consist of a single element. In other words. a hollowed solid piece of wood is the ideal drum shell. When you compare the resonance of a piece of solid wood to a piece of plywood the difference in sound quality is obvious.A one piece snare drums is very fragile due to its construction.To cover up these shortcomings plywood shells are widely utilized. By plying several pieces of wood together with glue the drum shell is several more times durable than a one-piece shell. Consequently. natural resonance is impaired in exchange for durability. Throughout the world, drum manufacturers have tried several approaches to combat the issue of a single element and durability.Segmented shells are one approach and are closer to a one-piece shell. Another approach is to place a reinforcement hoop inside the bent piece of wood. One-piece wood is the most ideal in terms of pulling out the specific natural resonance. Because of technical problems such as shell alteration and cracking, which may occur several years after the drums production, only a few manufacturers are producing hollowed one-piece wood snare drums.                  * Since its debut, precious 200-year old redwood has been used for Zelkova Snare Drums. This material has become scarce in recent years, thus procurable quantities are yearly decreasing.   A new revolving height adjustable tubular lug                     Zelkova snare drum, the flagship model of Canopus which has enjoyed tremendous support since its introduction, has now unveiled a new revolving height adjustable tubular lug as a standard feature. The Zelkova snare drum features a hollowed one piece shell made from a stump of precious 200 years old Zelkova wood. The wood is seasoned for three years and moisture content is regulated down to 9 percent in a specially designed wood drier . However, this shell may still be affected by outside humidity, and may display a degree of contraction and expansion. The diameter of the shell increases when the humidity is high, and decreases when humidity is low. Since commonly used lugs have a swivel feature to accomodate the tension bolts, it wouldn’t matter if the drum shell expands or contracts. However, the Canopus tube lug has no swivel feature – it is a solid structure in order to enhance vibration cycle efficiency. Sometimes, when expansion and contraction occurs on the shell, perfect alignment of the tension bolts and lugs may prove difficult A new revolving height adjustable tubular lug has been designed in order to solve this problem. It has a mechanism which enables the user to adjust at the height of the lug by plus or minus 2mm by simply turning the center pole. We do not put any grommets in the air hole of Zelkova snare drums for the following reasons: 1. We would prefer not to put any kind of hardware on the Zelkova, so we eliminate any extraneous metal or wood to preserve the resonance of the drum.2. The wood can shrink, causing the grommet to rattle. The shell expands and contracts in response to temperature and moisture. Canopus takes every precaution to minimize drum shell shrinkage. Even though we dry the Zelkova snare drum shell until the moisture content is at 9% and the Zelkova snare drums shell is made without a seam (it’s made from one, non-comprised piece of wood), there is a possibility that the shell could still shrink or expand due to the changes in air moisture.3. Just look inside the air hole and you can appreciate the thickness of the single piece of wood.     Specs: HS-1450 (14"x5") HS-1465 (14"x6.5") HS-1480 (14"x8") Finish: Ninja Black Lacquer Lugs: Brass Hoop: Die-Cast / 8 Snare Wire: Vintage Snare Wire (CPSL-ZL14NP) Shell: One-Piece Hollowed Zelkova 14mm

Read more less

Steel 1,2 mm shell 13x3,8 - Black Satin Finish Standard features: Triple flange 2,3mm hoops gold. Brass chrome satin lugs by Steeldrum. Gibraltar picolo strainer. Bronze snare wires 16 or 20 wires. Remo Ambassador and resonant drum heads.

Read more less

Tama Bell Brass replica 14x6,5 Remo Ambassador and resonant drum heads. Hardcase bag

Read more less

Street Art 2mm shell - Satin finish Standard features: Triple flange 2,3mm hoops. Brass chrome custom lugs by Steeldrum. Gibraltar strainer. Muffler Bronze snare wires 16 or 20 wires. Remo Ambassador and resonant drum heads.

Read more less