Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
All products
Eikon Eikon Active Studio Subwoofer EK10SW
Pre-order
EK10SW 10” 150 W STUDIO SUBWOOFER EK NF is the ideal nearfield monitor solution for any kind of music production applications. From the carefully selected transducers to the proprietary enhanced waveguides and to the low resonance cabinet design, everything has been tailored to offer the best accuracy over the whole audio spectrum. The perfectly optimized electronics, including high headroom separate Class AB amplifiers for high and low section, high precision crossover networks and separate LIMITER circuits, provide maximum resolution and minimum listening fatigue. Active vented sub-woofer Long-excursion 10” woofer with PP cone featuring very extended response Precisely calculated front tuning port for greater low-frequency extension Stereo balanced inputs, outputs and link connectors for MONO and STEREO operation Optimized crossover design with HI-CUT and LO-CUT frequency control High-headroom Class AB 150W amplifier with accurate CLIP LIMITER DOWNLOAD User Manual Certification
-
Eikon Eikon STUDIO MICROPHONE WITH AUDIO INTERFACE CM14USB
Pre-order
CM14USB CONDENSER STUDIO MICROPHONE WITH USB INTERFACE The CM14USB is a USB/XLR cardioid condenser microphone.Equipped with both USB and an XLR outputs, this microphone is designed for analog or digital capturing from any acoustic audio source using your favorite recording software.The CM14USB is the perfect choice for vocal, acoustic instruments, VoIP and webcasting applications. The extended frequency and fast transient response ensures an accurate linear reproduction.The microphone also features a built-in headphone jack with volume control that allows you to monitor the direct microphone signal and the sound from your audio recording software.The microphone’s cardioid polar pattern delivers excellent off-axis rejection, and 24-bit, 96 kHz converters ensures clear sound reproduction. It also features a blue LED indicating the microphone’s power On.The CM14USB is a “Plug & Play” USB device, compatible with both Microsoft and Apple OS’ based computers, as well as Mobile Devices through standard USB camera connection kits. Pre-amp PCB and USB2.0 high speed audio processing 24Bit/96kHz sampling rate Designed to have 3.5mm stereo headphone output, mute button and output volume control knob Zero latency monitoring in an easy way Clear and nature sound with a superior performance Mic Holder is included CM14USB is a perfect choice for music creation
-
Eikon Eikon PROFESSIONAL STUDIO MICROPHONE C14
Pre-order
C14 CONDENSER STUDIO MICROPHONE The C14 condenser microphone is made following the strictest construction standards which make it the ideal microphone for any professional application. Equipped with a 1.1“ Mylar capsule with gold-coated surface that guarantees a transparent high frequencies response, getting an excellent vocal range and acoustic instruments image even in the most difficult mixing circumstances. The package includes a shockmount support, windscreen filter and a sturdy aluminum carrying case. Trasparent sound with superb detail and warm armonic content Extended low-frequency range response WIMA capacitors Integrated shockmount support DOWNLOAD User Manual Frequency Response Polar Pattern
-
Eikon Eikon 5-Piece Drum Microphone Kit with Case DMH5XL
Pre-order
5 pcs drum kit Includes: DM12 1 pc DM1 3 pcs CM602 1 pcs MIC HOLDER 3 pcs ABS carrying case DM1 (Percussion Microphone) Cardioid Polar Pattern for an accurate sound reproduction without unnecessary back ground noise Frequency Response tailored for percussions, snare drums, toms and other instruments High gain before feedback Internal shock mount for reduced noise Compact design reduces stage clutter Hardened steel mesh grille DM12 (Bass Drum Microphone) Super-cardioid Polar Pattern Fast transient response Low frequency extension Designed to be used with bass drums, bass guitar cabs, tubas and other low frequency instruments Internal shock mount for reduced noise Durable metal construction with hardened steel mesh grille CM602 (Cymbal Microphone) Permanently polarized condenser capsule Uni-directional Polar Pattern Light and rugged construction High applicable SPL for close miking on stage Particularly suited as overhead for drums and percussion, for the hi-hat, wood wind and brass instruments, guitar
-
Eikon Eikon 8-Piece Drum Microphone Kit with Case DMH8XL
Pre-order
8 pcs drum kit Includes: DM12 1 pc DM1 4 pcs CM602 3 pcs MIC HOLDER 4 pcs ABS carrying case DM1 (Percussion Microphone) Cardioid Polar Pattern for an accurate sound reproduction without unnecessary back ground noise Frequency Response tailored for percussions, snare drums, toms and other instruments High gain before feedback Internal shock mount for reduced noise Compact design reduces stage clutter Hardened steel mesh grille DM12 (Bass Drum Microphone) Super-cardioid Polar Pattern Fast transient response Low frequency extension Designed to be used with bass drums, bass guitar cabs, tubas and other low frequency instruments Internal shock mount for reduced noise Durable metal construction with hardened steel mesh grille CM602 (Cymbal Microphone) Permanently polarized condenser capsule Uni-directional Polar Pattern Light and rugged construction High applicable SPL for close miking on stage Particularly suited as overhead for drums and percussion, for the hi-hat, wood wind and brass instruments, guitar
-
DH DH Speaker Stand DHSS60
Pre-order
Heavy-duty professional loudspeakers stand, made of tubular steel and die cast aluminum parts. Featuring exclusive automatic elevation mechanism powered by an internal system of compressed air, which helps to raise the loudspeaker without effort. Maximum height 2000 mm. Matt black finishing. Adjustable height: 1280 - 2000 mm Weight: 5.00 kg Maximum load capacity: 50 kg Base: Ø 1200 mm Terminal tube: Ø 35 mm Colour: Black
-
DH DH Speaker Stand Kit DHSS50KIT
Pre-order
Pair of professional DHSS50 stands provided with a practical 210D nylon carrying bag. The DHSS50 is included into the professional speaker stands line, constructed from robust steel tubes and aluminum parts. Equipped with the new security system with automatic pin and the well known "AIR-CUSHIONED" system, to ensure maximum fl exibility, fast and easy adjustment. Featuring die cast collar for better strength of the legs joint. Available in matt black. Details of the single stand: DHSS50 - It cannot be sold individually Colour: Black Adjustable height: 1390 - 2000 mm Weight: 3.90 kg Maximum load capacity: 50 kg Base: Ø 1200 mm Terminal tube: Ø 35 mm
-
DH DH Speaker Stand spacer DHSS40
Pre-order
Professional speaker stands line, constructed from robust steel tubes and aluminum parts. Equipped with the new security system with automatic pin and the well known "AIR-CUSHIONED" system, to ensure maximum flexibility, fast and easy adjustment. Floor standing supports are also provided with die cast collar for better strength of the legs joint. Available in matt black. Colour: Black Adjustable height: 880 - 1320 mm Weight: 1 kg Maximum load capacity: 40 kg Terminal tube: Ø 35 mm
-
DH DH Speaker Stand DHSS30
Pre-order
Line of professional speaker / lighting stands constructed from robust steel tubes and die-cast aluminium. The lifting mechanism features a mechanical brake to guarantee maximum load stability and ease of set up. Colour: Black Adjustable height: 1850 - 3200 mm Weight: 9.50 kg Maximum load capacity: 50 kg Base: Ø 1300 mm Terminal tube: Ø 35 mm
-
DH DH Speaker Stand DHSS20
Pre-order
Line of professional speaker / lighting stands constructed from robust steel tubes and die-cast aluminium. The lifting mechanism features a mechanical brake to guarantee maximum load stability and ease of set up. Colour: Black Adjustable height: 1400 - 2200 mm Weight: 8.50 kg Maximum load capacity: 60 kg Base: Ø 1300 mm Terminal tube: Ø 35 mm
-
DH DH Microphone Boom (no stand) DHPMS70
Pre-order
Professional telescopic boom, equipped with new concept die-cast aluminum joints, present ergonomic and high-quality components that increase the friction and allow accurate adjustments. Equipped with a 3/8 “thread with pitch 5/8” adapter included. It can be used with the straight DHPMS30 mic stand and with DHKS10 series keyboard stand. Available in matte black. Boom length: 580 - 910 mm Weight: 0.60 kg Colour: Matte black
-
DH DH Microphone Boom Stand low profile DHPMS60
Pre-order
Professional low profile telescopic boom microphone stand, featuring die-cast aluminum heavy duty tripod base and upper joint, with thick steel pipes for optimum stability. The new concept upper joint, presents ergonomic and high-quality components that increase the friction and allow accurate adjustments. It is also provided with a central die-cast aluminum sleeve covered with “soft-grip” rubber which allows a firm grip for a simple and safe height adjustment. Equipped with a 3/8” thread with 5/8” adapter included. Available in matt black. Base dimension: Ø 600 mm Minimum height: 400 mm Maximum height: 770 mm Boom length: 580 - 910 mm Weight: 2.30 kg Colour: Matt black
Invalid password
Enter
