All products

  The RM8 ribbon microphone is made following the strictest construction standards which make it the ideal microphone for any professional application.   Equipped with Double-sided 0,02 mm pure aluminum foil for an excellent vocal range and acoustic instruments image, even in the most difficult mixing circumstances.   The package includes a shockmount support, windscreen filter and a sturdy aluminum carrying case. Double-sided 0,02 mm pure aluminium foil Wide low-frequency range and fast transient response WIMA capacitors Integrated shockmount support   Type Ribbon Microphone Polar pattern Figure-8 Frequency response 20 Hz - 20 Khz Sensitivity - 34 dB ± 2 db ( 0 dB = 1VPa @ 1 Khz ) Max SPL for 1% THD 130 dB S/N Ratio 79 dB Impedance 200 Ω ± 30% ( at 1kHz ) Recommended Load Impedance 1000 Ω Power Requirement 48 V Phantom Power Connector 3 Pin XLR Male Weight 474 g Dimensions 50 Ø x 190 mm Accessories Shockmount

Read more less

  The MPAMP4 compact headphones amplifier features a pass-through MIC/LINE input and a STEREO/MONO monitor input with individual level controls. It is very useful in recording studios or on stages when you need to mix and listen to two sound sources together. This headphones amplifier is designed for use with all types of in-ear or over-ear headphones and therefore offers maximum flexibility for personal monitoring. It is typically used to combine your voice or instrument with other members of the band during a live concert or to listen to pre-recorded tracks during recording, allowing for customized mixing of the monitor signal. The THRU connection allows you to directly feed your voice or instrument to other live or recording equipment.   Input Section Connectors  1 x COMBO,  2x 1/4" JACK unbalanced Inputs 1x MIC/LINE 1x MONITOR (stereo/mono) Input Impedance 10 Kohm (LINE/MONITOR), 1 Kohm (MIC) Max Input Level +20 dBu (MONITOR), +10 dBu (LINE), -15 dBu (MIC) Output Section Connector  1x XLR-M, 1x 1/4" or 1/8" JACK stereo Outputs 1x MIC/LINE THRU, 1x HEADPHONES stereo Max output 32ohm 2x 100mW Max output 600ohm 2x 100mW Load Impedance min 16 ohm Max gain +8 dB (MONITOR), +14dB (LINE), +35dB (MIC) System Performance  Distortion (THD) 0.02 % Noise  < -98 dBu unweighted Frequency Response  20 Hz - 20 KHz (-3 dB) Power Supply Connector USB Type B AC/DC adapter input 100-240V~ (±10%) 50/60Hz AC/DC adapter output 5V--- 1A (5W) Supplied cable 1,2m USB Type A - Type B General  Controls MIC/LINE LEVEL, MONITOR LEVEL,MIC/LINE SELECTOR, GND LIFT Indicators Power ON Dimensions (W x H x D)  160 x 52 x 106 mm (6.30 x 2.05 x 4.17 ") Weight 0,52 Kg (main)0,08 Kg (adapter with cable)

Read more less

  The compact HPAMP4 Headphones Amplifier features a stereo input and four headphone outputs with individual level controls. It is very useful in small studios or stages when up to four people want to listen together. This 4-channel stereo headphone amplifier is designed for use with all types of headphones and therefore offers maximum flexibility. Its high-power stereo amplifiers with the low-noise 4580 OPAMP guarantee the highest sonic quality even at maximum volume. The input connections with 1/4” jack, mini-jack, RCA and mono/stereo switch together with output connections 1/4” jack and mini-jack allow the maximum flexibility without the need of special connection adapters.   Input Section Connectors  2x RCA, 1x 1/4" JACK stereo, 1x 1/8" JACK stereo Inputs 1x stereo Input Impedance 20 Kohm Max Input Level +20 dBu Output Section Connector  4x 1/4" JACK stereo or 1/8" JACK stereo Outputs 4x HEADPHONES stereo Max output 32ohm 2x 100mW (each channel) Max output 600ohm 2x 100mW (each channel) Load Impedance min 16 ohm per channel Max gain +20 dB (each channel) System Performance    Distortion (THD) 0.02 % Noise  < -98 dBu unweighted Frequency Response  20 Hz - 20 KHz (-3 dB) Power Supply Connector USB Type B AC/DC adapter input 100-240V~ (±10%) 50/60Hz AC/DC adapter output 5V--- 1A (5W) Supplied cable 1,2m USB Type A - Type B General    Controls 4x OUTPUT LEVEL, INPUT STEREO/MONO SWITCH Indicators Power ON Dimensions (W x H x D)  160 x 52 x 106 mm (6.30 x 2.05 x 4.17 ") Weight 0,50 Kg (main)0,08 Kg (adapter with cable)

Read more less

  HFJ700 is a closed dynamic stereo circumaural headphones characterized by transparent sound reproduction and excellent frequency response.  The black color with silver finishes make it a very elegant product of absolute design.  The headset is equipped with an elastic cable extensible from 2 to 3.5 meters which makes it ideal for use with DJ consoles, Mp3s, iPods, iPhones, CD players.  Single connection cable with 3.5mm or 6.3mm screw connector. Dynamic Neodymium magnet Soft and supple comfortable cushioned earpads Adjusting headset 3,5 + 6,3 mm stereo jack   Type Dynamic Neodymium magnet Driver Size 57 mm Frequency Range 20 - 22000 Hz Sound Pressure Level (Spl) 105 ±3 dB Power Handling Capability 3000mw Nominal Impedance 32 Ω Jack Plug 3,5 + 6,3 mm stereo jack Cable lenght 2 to 3,5 m (fully extended) Weight w/o cable 260 g

Read more less

  EIKON HFC30 is a supra-aural dynamic stereo headphone suitable for a multitude of multimedia applications thanks to the wide and linear frequency response.  Ideal for all types of music - deep and balanced bass - maximum authenticity in the reproduction of the voice. Single connection cable with 3.5mm or 6.3mm screw connector. Dynamic Neodymium magnet Soft and supple comfortable cushioned earpads Adjusting headset 3,5 + 6,3 mm stereo jack   Type Dynamic Neodymium magnet Driver Size 40 mm Frequency Range 10 - 20000 Hz Sound Pressure Level (Spl) 105 ±3 dB Power Handling Capability 300mw Nominal Impedance 32 Ω Jack Plug 3,5 + 6,3 mm stereo jack Cable lenght 3 m Weight w/o cable 185 g

Read more less

 The EIKON H800 headphones with its 45 mm neodymium transducers offer you an unrivaled frequency response and total comfort that allows you to have an optimal listening experience.  Smooth audio reproduction with deep bass Closed-back, circumaural design isolate against ambient noise Extremely soft and supple comfortable cushioned earpads Compatible with all major smartphone and tablet models Type Dynamic Neodymium magnet Driver Size 45 mm Frequency Range 10 - 26000 Hz Sound Pressure Level (Spl) 98 ±3 dB Power Handling Capability 1800mw Nominal Impedance 40 Ω Jack Plug 3,5 + 6,3 mm stereo jack Cable lenght 180 cm Weight w/o cable 295 g

Read more less

The EIKON H200 headphones with its 40 mm neodymium transducers offer you an unrivaled frequency response and total comfort that allows you to have an optimal listening experience. Smooth audio reproduction with deep bass Closed-back, circumaural design isolate against ambient noise Extremely soft and supple comfortable cushioned earpads Compatible with all major smartphone and tablet models Type Dynamic Neodymium magnet Driver Size 40 mm Frequency Range 10 - 28000 Hz Sound Pressure Level (Spl) 95 ±3 dB Power Handling Capability 400mw Nominal Impedance 32 Ω Jack Plug 3,5 + 6,3 mm stereo jack Cable lenght 180 cm Weight w/o cable 235 g

Read more less

The Eikon H1000 headphones with its 50mm neodymium transducers offer you an unrivaled frequency response and total comfort that allows you to have an optimal listening experience. Professional Hi-End Closed-back Circumaural Headphones 50 mm Driver size Dynamic Neodymium magnet Single-side detached cable design Two 3 meters cable types included Comfortable fit due to rugged, adjustable, soft padded headband construction 3,5 + 6,3 mm stereo jack Type 50 mm neodymium driver Rated impedance 32 Ω Sensitivity 100 ±3 dB Audio frequency bandwidth 10 Hz-30 Khz Max power 1800 mW Cable length 300 cm Plug mini jack stereo 3,5 mm + adapter 6,3 mm Net Weight 305 g with cable

Read more less

  With EKUSBX1, turn your PC or Mac into a recording studio.  You won't need expensive external equipment, but you can easily connect your professional XLR microphone directly to your computer's USB port.  No complicated installations are necessary, because the Plug & Play device is automatically recognized by all operating systems without the need to install any drivers and you can immediately proceed with your recording.   Simple USB plug-and-play connection AD Converters: 16Bit 48/44.1KHz Dynamic Range: 80dB Frequency Response at 48KHz: 20-19KHz Signal Boost Gain: +20dB Compatible with all Operating Systems without additional driver

Read more less

EKUSBDM1 is a professional dynamic handheld microphone with USB digital output for direct connection to a computer and xlr analog output for connection to a mixer, audio interface or other amplification system.  The dynamic capsule with cardioid polar pattern captures the sound of the voice and it's not sensitive to other noises in the room.  EKUSBDM1 is the optimal choice for podcasting and home recording. Dynamic microphone with cardioid polar response Audio Interface for direct connection to a computer's USB port High resolution A/D converter Driver installation not required 5mt. microphone cable and USB cable are included   Polar Pattern Cardioid Transducer Type Moving coil Dynamic Sensitivity 1kHz -53 dBv +/-3dB Analog output; -28 dBv +/-3dB Digital output Frequency Response 60 - 14000 Hz Max SPL for 1% THD 120 dB Impedance 600 Ω A/D converter 16 bit at 48 Khz sampling rate Connector 3 pin xlr + USB Type A USB Support USB 1.1 , USB 2.0 Weight 290 g Dimension H.185 mm x Ø 51 mm

Read more less

  SBi-POD is an USB audio interface designed to offer studio quality for home or mobile recording, live stream or podcasting. Utilizing high-grade components, premium circuitry and a compact and rugged design, it provides a full set of features and top performances for musicians, songwriters content creators and podcasters. One XLR input and one TRS inputs with HI-Z switch for recording vocals and instrument together High-definition MIC preamp with extended dynamic range and 48V phantom power 2-in + 2-out high-resolution 24-bit/192KHz USB2.0 interface for a flawless audio quality Zero-latency DIRECT MONITORING with STEREO/MONO selector Analog outputs for connecting studio monitors Headphones output with separate level control Minijack AUX input/output for recording or podcasting applications directly on tablet or smartphone REC SOURCE selector USB bus powered for easy mobile recording (Type-B and Type-C connectors) Rugged, road-proof aluminum chassis for maximum protection   Microphone Preamp Type XLR female, balanced Frequency Response (±3.0 dB) 10 Hz to 22 kHz Input Impedance (Balanced) 1,32 kΩ THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) < 0.005% S/N Ratio (Unity Gain, Ref. = +4 dBu, 20 Hz to 22 kHz) > 94 dB Common Mode Rejection Ratio (1 kHz, 40 dB Gain) > 65 dB Gain Control Range (± 1 dB) 0 dB to 40 dB Max Input Level (Unity Gain, 1 kHz @ 0.1% THD+N) +0 dBu Phantom Power (±2 VDC) +48 VDC Line Input Max Input Level (Unity Gain, 1 kHz @ 0.1% THD+N) +14 dBu Type JACK ¼" TRS female, balanced Input Impedance 15 kΩ Instrument Input Max Input Level (Unity Gain, 1 kHz @ 0.1% THD+N) +14 dBu Type JACK ¼" TS female, unbalanced Input Impedance 1 MΩ Line Outputs Type JACK ¼" TRS female, balanced Output Impedance 600Ω Headphone Output Type JACK ¼" TRS active stereo Maximum Output 50 mW/ch. @ 32Ω Load Frequency Response (±1.0 dB) 10 Hz - 25 kHz Digital Audio ADC Dynamic Range (A-wtd, 48 kHz Sample Rate) 107 dB DAC Dynamic Range (A-wtd, 48 kHz Sample Rate) 108 dB Bit Depth 16 / 24 /32 Reference Level for 0 dBFS +14 dBu Internal Sample Frequency Selections (kHz) 44.1, 48, 88.2, 96, 176.4, 192 Power USB bus-powered Physical Height 52 mm (2.05") Depth 106 mm (4.17") Width 160 mm (6.30") Weight 0.53 kg (1.17 lbs)

Read more less

  EK8NF 8” NEAR-FIELD STUDIO MONITOR EK NF is the ideal nearfield monitor solution for any kind of music production applications. From the carefully selected transducers to the proprietary enhanced waveguides and to the low resonance cabinet design, everything has been tailored to offer the best accuracy over the whole audio spectrum. The perfectly optimized electronics, including highheadroom separate Class AB amplifiers for high and low section, high precision crossover networks and separate LIMITER circuits, provide maximum resolution and minimum listening fatigue. Bi-amplified 2-way system 1 “soft-dome tweeter for detailed response and a high-resolution sound Proprietary integrated elliptical waveguide with accurate directivity control Long-excursion 8” woofer with lightweight fiber-glass composite cone Precisely calculated front tuning port for greater low-frequency extension Multiple audio input connectors for connecting any kind of source HF adjustment for a flexible control of high frequency response Sophisticated, carefully designed crossover filters for an improved resolution High-headroom Class AB 45+75W amplifiers with dual accurate CLIP LIMITER DOWNLOADUser ManualCertification

Read more less